Verified 200-301 exam dumps Q&As with Correct 216 Questions and Answers
Cisco 200-301 Test Engine PDF - All Free Dumps from TestkingPDF
CCNA Exam Description
The new CCNA validation is a 2-hour long test that proves your mastery of network fundamentals among other topics. The total number of questions is 120 and you can attempt the exam in the English or Japanese languages. Every attempt will cost $300.
CCNA 200-301 Exam: What Is It?
The Cisco 200-301 test is a part of the new CCNA certification that validates a wide range of skills and knowledge areas. This exam covers programmability, automation, as well as networking, and security fundamentals. This is the only test that you should take to obtain the Cisco CCNA certification. The time allocated for 200-301 exam is 120 minutes. This test consists of various types of questions, including multiple-choice, testlets, drag and drop, simlets, and scenario-based options. The passing score is not mentioned by the vendor but you should try to get at least 80% of all the content. Please note that this CCNA exam is available in English and Japanese. Scheduling the Cisco 200-301 is easy. Just log into your account at Pearson VUE and then select the “Proctored Exams” section. Enter the exam code and follow the prompts to complete the registration process.
NEW QUESTION 48
which two TCP messages use a 32-bit number as part of the initial TCP handshake? (choose two)
- A. ACK
- B. FIN
- C. RST
- D. SYN
- E. SYN-ACK
Answer: D,E
NEW QUESTION 49
Drag and drop the SNMP manager and agent identifier commands from the left onto the functions on the right
Answer:
Explanation:
NEW QUESTION 50 
Refer to the exhibit. After the configuration is applied, the two routers fail to establish an OSPF neighbor relationship. what is the reason for the problem?
- A. The OSPF process IDs are mismatched.
- B. Router2 is using the default hello timer.
- C. The network statement on Router1 is misconfigured.
- D. The OSPF router IDs are mismatched.
Answer: B
NEW QUESTION 51
Frame flooding can occur in which circumstance?
- A. The destination MAC address is missing from the CAM table
- B. The source MAC address is missing from the CAM table
- C. The destination IP address is missing from the route table
- D. The source IP address is missing from the route table
Answer: A
NEW QUESTION 52
What mechanism carries multicast traffic between remote sites and supports encryption?
- A. GRE
- B. GRE over IPsec
- C. ISATAP
- D. IPsec over ISATAP
Answer: B
Explanation:
Section: Security Fundamentals
NEW QUESTION 53
Refer to the exhibit.
An engineer is required to verify that the network parameters are valid for the users wireless LAN connectivity on a /24 subnet. Drag and drop the values from the left onto the network parameters on the right. Not all values are used.
Answer:
Explanation:
NEW QUESTION 54
Refer to the exhibit.
An engineer is required to verify that the network parameters are valid for the users wireless LAN connectivity on a /24 subnet. Drag and drop the values from the left onto the network parameters on the right. Not all values are used.
Answer:
Explanation:
NEW QUESTION 55
If a notice-level message is sent to a syslog server, which event has occurred?
- A. A network device has restarted.
- B. An ARP inspection has failed.
- C. A debug operation is running.
- D. A routing instance has flapped.
Answer: C
NEW QUESTION 56
Drag and drop the threat-mitigation techniques from the left onto the types of threat or attack they mitigate on the right.
Answer:
Explanation:
Explanation
Double-Tagging attack:In this attack, the attacking computer generates frames with two 802.1Q tags. The first tag matches the native VLAN of the trunk port (VLAN 10 in this case), and the second matches the VLAN of a host it wants to attack (VLAN 20).When the packet from the attacker reaches Switch A, Switch A only sees the first VLAN 10 and it matches with its native VLAN 10 so this VLAN tag is removed. Switch A forwards the frame out all links with the same native VLAN 10. Switch B receives the frame with an tag of VLAN 20 so it removes this tag and forwards out to the Victim computer.Note: This attack only works if the trunk (between two switches) has the same native VLAN as the attacker.To mitigate this type of attack, you can use VLAN access control lists (VACLs, which applies to all traffic within a VLAN. We can use VACL to drop attacker traffic to specific victims/servers) or implement Private VLANs.ARP attack (like ARP poisoning/spoofing) is a type of attack in which a malicious actor sends falsified ARP messages over a local area network as ARP allows a gratuitous reply from a host even if an ARP request was not received. This results in the linking of an attacker's MAC address with the IP address of a legitimate computer or server on the network. This is an attack based on ARP which is at Layer 2.Dynamic ARP inspection (DAI) is a security feature that validates ARP packets in a network which can be used to mitigate this type of attack.
NEW QUESTION 57
Which configuration is needed to generate an RSA key for SSH on a router?
- A. Configure VTY access.
- B. Configure the version of SSH
- C. Assign a DNS domain name
- D. Create a user with a password.
Answer: A
NEW QUESTION 58
Refer to the exhibit.
An engineer booted a new switch and applied this configuration via the console port. Which additional configuration must be applied to allow administrators to authenticate directly to enable privilege mode via Telnet using a local username and password?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
NEW QUESTION 59
A network engineer is configuring an OSPFv2 neighbor adjacency Drag and drop the parameters from the left onto their required categories on the right. Not all parameters are used
Answer:
Explanation:
NEW QUESTION 60
Refer to the exhibit.
Which route type does the routing protocol Code D represent in the output?
- A. statically assigned route
- B. internal BGP route
- C. /24 route of a locally configured IP
- D. route learned through EIGRP
Answer: D
NEW QUESTION 61
Drag and drop the Cisco Wireless LAN Controller security settings from the left onto the correct security mechanism categories on the right.
Answer:
Explanation:
NEW QUESTION 62
Refer to the exhibit. What two conclusions should be made about this configuration? (Choose two.)
- A. The root port is FastEthernet 2/1
- B. The designated port is FastEthernet 2/1
- C. The spanning-tree mode is Rapid PVST+
- D. The spanning-tree mode is PVST+
- E. This is a root bridge
Answer: A,C
NEW QUESTION 63
After you configure the ip dns spoofing command globally on a device, under which two conditions is DNS spoofing enabled on the device? (choose two)
- A. The ip host command is disabled
- B. The no ip domain lookup command is configured
- C. All configured IP name server addresses are removed
- D. The DNS server queue limit id disabled
- E. The ip dns spoofing command is disabled on the local interface
Answer: B,C
NEW QUESTION 64
Which two spanning-tree port states does RSTP combine to allow faster convergence? (Choose two.)
- A. forwarding
- B. learning
- C. listening
- D. blocking
- E. discarding
Answer: C,D
NEW QUESTION 65
Refer to exhibit
Which route type is configured to reach the internet?
- A. default route
- B. floating static route
- C. host route
- D. network route
Answer: A
NEW QUESTION 66
Drag and Drop Question
Refer to the exhibit. Drag and drop the networking parameters from the left on to the correct values on the right.
Select and Place:
Answer:
Explanation:
Explanation:
The "ip route" and "ip addr show eth1" are Linux commands.
+ "ip route": display the routing table
+ "ip addr show eth1": get depth information (only on eth1 interface) about your network interfaces like IP Address, MAC Address information
NEW QUESTION 67
Which spanning-tree enhancement avoids the learning and listening states and immediately places ports in the forwarding state?
- A. BPDUguard
- B. PortFast
- C. BPDUfilter
- D. Backbonefast
Answer: B
Explanation:
Section: Network Access
NEW QUESTION 68
Which two protocols are supported on service-port interfaces? (Choose two.)
- A. SSH
- B. TACACS+
- C. SCP
- D. RADIUS
- E. Telnet
Answer: A,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration-guide/b_cg75/b_cg75_chapter_011110.html
NEW QUESTION 69
......
Understanding functional and technical aspects of 200-301 CCNA Exam: Cisco Certified Network Associate Network Fundamentals
The following will be discussed here:
- Compare physical interface and cabling types
- Verify IP parameters for Client OS (Windows, Mac OS, Linux)
- Single-mode fiber, multimode fiber, copper
- Concepts of PoE
- SSID
- Multicast
- RF
- Compare IPv6 address types
- Explain the role and function of network components
- Describe the need for private IPv4 addressing
- 2 tier
- Spine-leaf
- Frame switching
- MAC learning and aging
- Connections (Ethernet shared media and point-to-point)
- Describe wireless principles
- Modified EUI 64
- Identify interface and cable issues (collisions, errors, mismatch duplex, and/or speed)
- Endpoints
- Nonoverlapping Wi-Fi channels
- MAC address table
- Anycast
- WAN
- Small office/home office (SOHO)
- Describe characteristics of network topology architectures
- Frame flooding
- Network Fundamentals
- Unique local
- Configure and verify IPv6 addressing and prefix
- Access points
- Controllers (Cisco DNA Center and WLC)
- Next-generation firewalls and IPS
- L2 and L- switches
- Describe switching concepts
- Link local
- On-premises and cloud
- Routers
- Configure and verify IPv4 addressing and subnetting
- Encryption
- 3 tier
- Global unicast
- Explain virtualization fundamentals (virtual machines)
- Servers
- Compare TCP to UDP
100% Passing Guarantee - Brilliant 200-301 Exam Questions PDF: https://www.testkingpdf.com/200-301-testking-pdf-torrent.html
Get New 200-301 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1yPQL9qnb-OwofRVRMIWB6GDT0HXHZlkO
