Real 200-301 are Uploaded by TestkingPDF provide 2021 Latest 200-301 Practice Tests Dumps.
All 200-301 Dumps and Cisco Certified Network Associate Exam Training Courses Help candidates to study and pass the Cisco Certified Network Associate Exam Exams hassle-free!
NEW QUESTION 72
Drag drop the descriptions from the left onto the correct configuration-management technologies on the right.
Answer:
Explanation:
NEW QUESTION 73
Refer to the exhibit. If configuring a static default route on the router with the ip route 0.0.0.0 0.0.0.0 10.13.0.1 120 command, how does the router respond?
- A. It starts sending traffic without a specific matching entry in the routing table to Gigabit EthernetO/1
- B. It immediately replaces the existing OSPF route in the routing table with the newly configured static route
- C. It starts load-balancing traffic between the two default routes
- D. It ignores the new static route until the existing OSPF default route is removed
Answer: A
NEW QUESTION 74
What is the primary function of a Layer 3 device?
- A. to analyze traffic and drop unauthorized traffic from the Internet
- B. to transmit wireless traffic between hosts
- C. forward traffic within the same broadcast domain
- D. to pass traffic between different networks
Answer: B
NEW QUESTION 75
EIGRP GRE
You are implementing EIGRP between the main office and branch offices. In Phase 1, you must implement and verify EIGRP configurations as mentioned in the topology. In Phase 2, your colleague is expected to do NAT and ISP configurations.
Identify the issues that you are encountering during Phase 1 EIGRP implementation.
- Router R1 connects the main office to the Internet and router R2 and R3 are internal routers
- Routers Branch1 and Branch2 connect to router R2 in the main office.
- Users from the Branch1 LAN network 10 20.400/24 are expected to perform testing of the application that is hosted on the servers in Server farm1, before servers are available for production.
- The GRE tunnel is configured between R3 and Branch1, and traffic between server farm1 and Branch1 LAN network 10.20.40.0/24 is routed through the GRE tunnel using static routes
- The line between Branch1 and Branch2 is used as a secondary path in the event of failure of the primary path to main office You have console access on R1, R2 R3 Branch1, and Branch2 devices use only show commands to troubleshoot the issues.
Examine the R1 routing table. None of the internal routes other than locally connected appear in the routing table.
Which cause of the issue is true?
- A. IP address was misconfigured between the RI and R2 interface
- B. EIGRP packets were blocked by the inbound ACL on R1
- C. EIGRP neighbor relationship was not formed due to k values mismatch between routers R1 and R2
- D. EIGRP neighbor relationship was not formed due to As mismatch between routers R1 and R2
Answer: A
NEW QUESTION 76
Refer to the exhibit.
What is the result if Gig1/11 receives an STP BPDU?
- A. The port transitions to STP blocking
- B. The port transitions to the root port
- C. The port goes into error-disable state
- D. The port immediately transitions to STP forwarding.
Answer: C
NEW QUESTION 77
Refer to the exhibit.
The network administrator wants VLAN 67 traffic to be untagged between Switch 1 and Switch 2 while all other VLANs are to remain tagged.
Which command accomplishes this task?
- A. switchport access vlan 67
- B. switchport private-vlan association host 67
- C. switchport trunk allowed vlan 67
- D. switchport trunk native vlan 67
Answer: D
NEW QUESTION 78
Refer to the exhibit.
An engineer is tasked with verifying network configuration parameters on a client workstation to report back to the team lead. Drag and drop the node identifiers from the left onto the network parameters on the right.
Answer:
Explanation:
NEW QUESTION 79
Which protocol is the Cisco proprietary implementation of FHRP?
- A. CARP
- B. HSRP
- C. GLBP
- D. VRRP
Answer: B
NEW QUESTION 80
A network analyst is tasked with configured the date and time on a router using EXEC mode. The date must be set to 12:00am. Which command should be used?
- A. Clock summer-time-recurring
- B. Clock set
- C. Clock summer-time date
- D. Clock timezone
Answer: B
NEW QUESTION 81
Which two values or settings must be entered when configuring a new WLAN in the Cisco Wireless LAN Controller GUI? (Choose two.)
- A. IP address of one or more access points
- B. SSID
- C. management interface settings
- D. QoS settings
- E. profile name
Answer: B,E
Explanation:
Section: Network Access
NEW QUESTION 82
Refer to the exhibit.
Based on the LACP neighbor status, in which mode is the SW1 port channel configured?
- A. passive
- B. mode on
- C. active
- D. auto
Answer: C
Explanation:
Explanation
From the neighbor status, we notice the "Flags" are SP. "P" here means the neighbor is in Passive mode.In order to create an Etherchannel interface, the (local) SW1 ports should be in Active mode.Moreover, the "Port State" in the exhibit is "0x3c" (which equals to "00111100 in binary format).Bit 3 is "1" which means the ports are synchronizing -> the ports are working so the local ports should be in Active mode.
NEW QUESTION 83 
Refer to the exhibit. How does router R1 handle traffic to 192.168.10.16?
- A. It selects the OSPF route because it has the lowest cost.
- B. It selects the EIGRP route because it has the lowest administrative distance.
- C. It selects the RIP route because it has the longest prefix inclusive of the destination address.
- D. It selects the IS-IS route because it has the shortest prefix inclusive of the destination address.
Answer: C
NEW QUESTION 84
Refer to the exhibit.
To which device does Router1 send packets that are destined to host 10.10.13.165?
- A. Router4
- B. Router2
- C. Router5
- D. Router3
Answer: D
NEW QUESTION 85
A frame that enters a switch fails the Frame Check Sequence. Which two interface counters are incremented? (Choose two)
- A. frame
- B. input errors
- C. runts
- D. CRC
- E. giants
Answer: B,D
Explanation:
Whenever the physical transmission has problems, the receiving device might receive a frame whose bits have changed values. These frames do not pass the error detection logic as implemented in the FCS field in the Ethernet trailer. The receiving device discards the frame and counts it as some kind of input error.
Cisco switches list this error as a CRC error. Cyclic redundancy check (CRC) is a term related to how the FCS math detects an error.
The "input errors" includes runts, giants, no buffer, CRC, frame, overrun, and ignored counts.
The output below show the interface counters with the "show interface s0/0/0" command:
NEW QUESTION 86
Drag and drop the functions from the left onto the correct network components on the right
Answer:
Explanation:
NEW QUESTION 87
Drag the descriptions of device management from the left onto the types of device management on the right.
Answer:
Explanation:
Explanation
Cisco DNA Center Device Management
3. Monitor the cloud for software update
5. Uses CLI templates to apply a consistent configuration to multiple devices at an individual location
6. Uses NetFlow to analyse potential security threats throughout the network and take appropriate action on that traffic Traditional device management
2. Manages device configuration on a per-device basis
4. Security is managed near the perimeter of the network with firewalls, VPNs, and IPS
* Implements changes via an SSH terminal
NEW QUESTION 88
Refer to the exhibit.
Which outcome is expected when PC_A sends data to PC_B?
- A. The source MAC address is changed.
- B. The source and destination MAC addresses remain the same.
- C. The destination MAC address is replaced with ffff.ffff.ffff.
- D. The switch rewrites the source and destination MAC addresses with its own.
Answer: B
NEW QUESTION 89
......
Valid Way To Pass Cisco's 200-301 Exam with : https://www.testkingpdf.com/200-301-testking-pdf-torrent.html
Free Test Engine For Cisco Certified Network Associate Exam Certification Exams: https://drive.google.com/open?id=13kXn8mF_2QfWzdcobMe_xCyF4kUsvkyi
