[Dec 17, 2021] 350-501 Dumps PDF and Test Engine Exam Questions - TestkingPDF
Verified 350-501 exam dumps Q&As with Correct 250 Questions and Answers
NEW QUESTION 79
Refer to the exhibit:
Router R1 and its peer R2 reside on the same subnet in the network, If does it make connections to R27
- A. R1 establishes UDP connections that are authenticated with an MD5 password
- B. R1 establishes UDP connections that are authenticated with a clear-text password
- C. R1 establishes TCP connections that are authenticated with a clear-text password
- D. R1 establishes TCP connections that are authenticated with an MD5 password
Answer: D
NEW QUESTION 80
Refer to the exhibits:
R1 and R2 are directly connected and IS-IS routing has been enabled between R1 and R2 R1 message periodically Based on this output, which statement is true?
- A. IS-IS neighbor authentication is failing for Level 1 PDUs only
- B. IS-IS neighbor authentication is failing for Level 2 first and then for Level 1 PDUs
- C. 1S-1S neighbor authentication is failing for Level 1 and Level 2 PDUs .
- D. IS-IS neighbor authentication is failing for Level 2 PDUs only.
Answer: A
NEW QUESTION 81
Refer to the exhibit:
An engineer wants to authenticate the OSPF neighbor between PEA and PE-B using MD5.
Which command on PE-B successfully completes the configuration?
- A. PE-B(config-if)#ip ospf message-digest-key 1 md5 44578611
PE-B(config-if)#ip ospf authentication null - B. PE-B(config-if)#ip ospf message-digest-key 1 md5 44568611
PE-B(config-if)#ip ospf authentication null - C. PE-B(config-if)#ip ospf message-digest-key 1 md5 44578611
PE-B(config-if)#ip ospf authentication message-digest - D. PE-B(config-if)#ip ospf message-digest-key 1 md5 44578611
PE-B(config-if)#ip ospf authentication key-chain 44578611
Answer: C
NEW QUESTION 82
Refer to the exhibit:
Which three outcomes occur if the prefix list is added to the neighbor? (Choose three)
- A. 192.168 0.0/17 is denied.
- B. 192.168 0.0/17 is permitted
- C. 192.168 0.0/19 is denied.
- D. 192.168.0.0/16 is denied
- E. 192.168 0.0/19 is permitted
- F. 192.168 0.0/16 is permitted
Answer: B,D,E
NEW QUESTION 83
Drag and drop the descriptions from the left onto the corresponding OS types on the right.
Answer:
Explanation:
NEW QUESTION 84
Refer to the exhibit:
Which two statements about the ISIS topology are true? (Choose two.)
- A. R1 and R4 are Level 2 neighbors
- B. R1 and R2 are Level 2 neighbors.
- C. All four routers are operating as Level 2 routers only.
- D. All four routers are operating as Level 1-2 routers.
- E. All four routers are operating as Level 1 routers only.
Answer: B,D
NEW QUESTION 85
Refer to the exhibit.
What is the effect of this configuration?
- A. R1 supports a peer that is configured for LDP SSO/NSF as the peer recovers from an outage.
- B. R1 supports a graceful restart operation on the peer, even if graceful restart is disabled on the peer.
- C. R1 failovers only to a peer that is configured for LDP SSO/NSF.
- D. R1 failovers to any peer.
Answer: C
NEW QUESTION 86
An engineer is setting up overlapping VPNs to allow VRF ABC and XYZ to communicate with VRF CENTRAL but wants to make sure that VRF ABC and XYZ cannot communicate. Which configuration accomplishes these objectives?
A)
B)
C)
- A. Option B
- B. Option A
- C. Option C
Answer: A
NEW QUESTION 87
Refer to the exhibit:
BGPsec is implemented on R1. R2. R3. and R4 BGP peering is established between neighboring autonomous systems Which statement about implementation is true?
- A. BGP updates from the all BGP peers are appended with a community of no export
- B. BGP updates from the eBGP peers are appended with a BGPsec attribute sequence that includes a public key hash and digital signature
- C. BGP updates from the iBGP peers are appended with a community of local-as
- D. BGP updates from the eBGP peers are appended with an additional AS path value that is statically set by the domain administrator
Answer: B
NEW QUESTION 88
Drag and drop the LDP features from the left onto the correct usages on the right.
Answer:
Explanation:
Explanation
1: graceful restart 2: IGP synchronization 3: session protection 4: targeted-hello accept
NEW QUESTION 89
Refer to the exhibit.
An engineer implemented this configuration. What is the status of the neighbor relationship between R1 and R2?
- A. The neighbor relationship is down because the two routers are configured with different area types.
- B. The neighbor relationship is up because R2 is level i and level 2 router.
- C. The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different areas.
- D. The neighbor relationship is down because the two routers are in the same subnet.
Answer: C
NEW QUESTION 90
An engineer needs to implement QOS mechanism on customer's network as some applications going over the internet are slower than others. Which two actions must the engineer perform when implementing traffic shaping on the network in order to accomplish this task? (Choose two)
- A. Implement a scheduling function to handle delayed packets.
- B. Configure the token values in bytes.
- C. Configure a threshold over which excess packets are discarded.
- D. Configure a queue with sufficient memory to buffer excess packets.
- E. Implement packet remarking for excess traffic.
Answer: A,D
NEW QUESTION 91
Drag and drop the LDP features from the left onto the correct usages on the right.
Answer:
Explanation:
NEW QUESTION 92
Drag and drop the NAT64 descriptions from the left onto the correct NAT64 types on the right.
Answer:
Explanation:
NEW QUESTION 93
Which protocol does a Cisco MPLS TE tunnel use to maintain paths within the core?
- A. STP
- B. VTP
- C. RPF
- D. RSVP
Answer: D
NEW QUESTION 94
Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right
Answer:
Explanation:
Explanation
Path Computation Element (Calculates paths through the network, keeps TE topology database information, sends path status updates) Path computation Client (sends path calculation request, sends path creation request) Path Computation Element (PCE) Represents a software module (which can be a component or application) that enables the router to compute paths applying a set of constraints between any pair of nodes within the router's TE topology database. PCEs are discovered through IGP.
Path Computation Client (PCC)
Represents a software module running on a router that is capable of sending and receiving path computation requests and responses to and from PCEs. The PCC is typically an LSR (Label Switching Router).
https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r5-3/mpls/configuration/guide/b-mpls-cg53x-crs
NEW QUESTION 95
Refer to the exhibit:
Assume all other configurations are correct and the network is otherwise operating normally. Which conclusion can you draw about the neighbor relationship between routers R1 and R2?
- A. The neighbor relationship is up
- B. The neighbor relationship will be up only if the two devices have activated the correct neighbor relationships under the IPv4 address family
- C. The neighbor relationship is down because the loco I-as value for R2 is missing in the R1 neighbor statement
- D. The neighbor relationship is down because R1 believes R2 is in AS 65012.
Answer: D
NEW QUESTION 96
Refer to the exhibit.
An engineer is implementing Auto-RP and reviewing the configuration of the PE-A. Which configuration permits Auto-RP messages to be forwarded over this interface?
- A. PE-A(config-if)#ip igmp version 3
- B. PE-A(config-if)#ip pim sparse-dense-mode
- C. PE-A(config-if)#no ip pim bsr-border
- D. PE-A(config-if)#ip pim sparse-mode
Answer: B
NEW QUESTION 97
Refer to the exhibit:
In which way does router R1 operate differently than router R2?
- A. R1 sends LSA types 1 and 2, while R2 sends type 1. 2. and 7 LSAs
- B. R1 sends LSA type 2 only, while R2 sends type 1 and type 7 LSAs
- C. R1 sends LSA type 2 only and R2 sends LSA type 1 only
- D. R1 sends LSA types 5 and 7, while R2 sends type 1, 2, and 7 LSAs
Answer: A
NEW QUESTION 98
A network engineer is implementing BFD configuration changes on a customer's equipment. How is the bfd interval configuration on the interface disconnected?
- A. It is automatically disconnected when the BFD main interface is removed.
- B. It is automatically disconnected when the BFD-configured subinterface is removed.
- C. The status of the interface changes.
- D. The IPv4 or IPv6 address configuration on the interface changes.
Answer: A
NEW QUESTION 99
What is a primary benefit of IPoATM or MPLS over ATM backbone service provider networks?
- A. fixed-length cells
- B. variable-length packets
- C. dedicated circuits
- D. isochronous system
Answer: C
NEW QUESTION 100
Refer to the exhibit:
This output is included at the end of an output that was provided by a device using NETCONF.
What does the code show?
- A. It shows that the running configuration is blank
- B. It shows that the full configuration is being modeled by VANG
- C. It shows NETCONF uses remote procedure calls.
- D. It shows the hostname of the device as rpc-reply
Answer: C
NEW QUESTION 101
......
Exam Preparation
If you want to pass the Cisco 350-501 exam at the first attempt, it is essential to have a thorough preparation process. For this purpose, Cisco offers to take the Implementing and Operating Cisco Service Provider Network Core Technologies v1.0 course. This training option will give you all the information related to the configuration, verification, troubleshooting, and optimization of the Service Provider IP network infrastructures. Also, the applicants will have the required knowledge of the Service Provider technologies, including core architecture, networking, services, automation, quality of services, network assurance, and security. The candidates can take the SPCOR course in different ways of delivery. The instructor-led training will give them the equivalent of 3 days of self-study material and 5 days of hands-on lab practice. As for the e-learning option, they will have videos and questions that equivalent to 8 days of education.
Cisco 350-501 Test Engine PDF - All Free Dumps: https://www.testkingpdf.com/350-501-testking-pdf-torrent.html
Get New 350-501 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1XpBuVycvqq0PTxvmjHJd020k6If7_0W9
