300-620 Certification – Valid Exam Dumps Questions Study Guide! (Updated 113 Questions)
300-620 Dumps are Available for Instant Access using TestkingPDF
The Main Topics of the Exam
In this test, questions will be derived from six major modules that include related sub-topics. Here are the areas that the candidates can expect to face in 300-620:
- ACI anywhere
This is the last major topic you will be assessed on and it takes about 10% of the entire exam. Here, the candidates will be asked to describe multipod and multisite.
- The ACI integrations
15% of the questions are expected to be delivered from this topic. The applicants will be asked how to perform the implementation of the VMware vCenter DVS integration and what is the resolution immediacy when it comes to VMM. Finally, the candidates should be able to implement a managed as well as an unmanaged service graph.
- External Connectivity of Networks
In this domain, one should show the knowledge of the procedures such as Layer 2 out and Layer 3 out. These involve familiarity with the core concepts of STP/MCP and other related topics. The module covers 20% of the test.
NEW QUESTION 21
Which two components are essential parts of a Cisco ACI Virtual Machine Manager (VMM) domain policy configuration? (Choose two.)
- A. EPG static port binding
- B. Layer 3 outside interface association
- C. EPG association
- D. VMM domain profile
- E. IP address pool association
Answer: C,D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACI-Fundamenta
NEW QUESTION 22
An engineer needs to deploy a leaf access port policy group in ACI Fabric to support the following requirements:
* Control the amount of application data flowing into the system
* Allow the newly connected device to auto-negotiate link speed with the leaf switch Which two ACI policies must be configured to achieve these requirements? (Choose two.)
- A. link level policy
- B. ingress control plane policing policy
- C. ingress data plane policing policy
- D. L2 interface policy
- E. slow drain policy
Answer: A,C
Explanation:
Section: ACI Fabric Infrastructure
Explanation/Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/kb/ b_Cisco_ACI_and_Forward_Error_Correction.html
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/security/Cisco-APIC-Security- Configuration-Guide-401/b_Cisco_APIC_Security_Guide_chapter_01110.html#:~:text=Use%20data%20plane
%20policing%20(DPP,dropping%20of%20packets%20occurs%20immediately.
NEW QUESTION 23
Which new construct must a user create when configuring in-band management?
- A. VLAN pool
- B. bridge domain
- C. management contract
- D. management tenant
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/kb/ b_KB_Configuring_Static_Management_Access.html
NEW QUESTION 24
Refer to the exhibit.
A client reports that the ACI domain connectivity to the fiber channel storage is experiencing a B2B credit oversubscription. The environment has a SYSLOG server for state collection messages. Which value should be chosen to clear the critical fault?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 25
Which method does the Cisco ACI fabric use to load-balance multidestination traffic?
- A. spanning trees
- B. PIM routing
- C. shortest-path trees
- D. forwarding tag trees
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACI-Fundamenta
NEW QUESTION 26
Which two actions extend a Layer 2 domain beyond the ACI fabric? (Choose two.)
- A. creating an external physical network
- B. extending the EPG out of the ACI fabric
- C. extending the bridge domain out of the ACI fabric
- D. extending the routed domain out of the ACI fabric
- E. creating a single homed Layer 3 Out
Answer: B,D
Explanation:
Section: External Network Connectivity
Explanation/Reference:
NEW QUESTION 27
What must be enabled in the bridge domain to have the endpoint table learn the IP addresses of endpoints?
- A. L2 unknown unicast: flood
- B. unicast routing
- C. GARP based detection
- D. subnet scope
Answer: B
Explanation:
Reference:
https://hsvglobalschool.in/dhkycw/cisco-aci-bridge-domain.html
NEW QUESTION 28
Refer to the exhibit.
An engineer must configure an L3Out peering with the backbone network. The L3Out must forward unicast and multicast traffic over the link. Which two methods should be used to configure L3Out to meet these requirements? (Choose two.)
- A. Layer 3 routed subinterface
- B. Layer 3 routed port
- C. port channel with SVI
- D. VPC with SVI
- E. Layer 3 floating SVI
Answer: A,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centricinfrastructure/ guide-c07-743150.html#_L3Out_sStatic_rRoutes
NEW QUESTION 29
What does a bridge domain represent?
- A. Layer 2 forwarding construct
- B. tenant
- C. physical domain
- D. Layer 3 cloud
Answer: A
NEW QUESTION 30
In the context of ACI Multi-Site, when is the information of an endpoint (MAC/IP) that belongs to site 1 advertised to site 2 using the EVPN control plane?
- A. Endpoint information is exchanged across sites as soon as the endpoint is discovered in one site.
- B. Endpoint information is not exchanged across sites unless COOP protocol is used.
- C. Endpoint information is exchanged across sites when the endpoints are discovered in both sites.
- D. Endpoint information is not exchanged across sites unless a policy is configured to allow communication across sites.
Answer: B
NEW QUESTION 31
Refer to the exhibit.
An engineer is implementing Cisco ACI - VMware vCenter integration for a blade server that lacks support of bonding. Which port channel mode results in "route based on originating virtual port" on the VMware VDS?
- A. Static Channel - Mode On
- B. LACP Active
- C. MAC Pinning-Physical-NIC-load
- D. LACP Passive
- E. MAC Pinning+
Answer: E
NEW QUESTION 32
The company ESXi infrastructure is hosted on the Cisco UCS-B Blade Servers. The company decided to take advantage of ACI VMM integration to enable consistent enforcement of policies across virtual and physical workloads. The requirement is to prevent the packet loss between the distributed virtual switch and the ACI fabric. Which setting must be implemented on a vSwitch policy to accomplish this goal?
- A. LACP
- B. Static Channel
- C. MAC Pinning
- D. LLDP
Answer: C
NEW QUESTION 33
What represents the unique identifier of an ACI object?
- A. management information tree
- B. universal resource identifier (URI)
- C. application programming interface
- D. distinguished name
Answer: D
Explanation:
Reference:
https://www.slideshare.net/CiscoDevNet/introduction-to-aci-apis
NEW QUESTION 34
Which statement regarding ACI Multi-Pod and TEP pool is true?
- A. The Pod1 TEP pool must be split and a portion of the TEP pool allocated to each Pod.
- B. A different TEP pool must be assigned to each Pod.
- C. The same TEP pool is used in all Pods.
- D. The IP addresses used in the IPN network can overlap TEP pool of the APIC.
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-739714.html
NEW QUESTION 35
An engineer is configuring a VRF for a tenant named Cisco. Drag and drop the child objects on the left onto the correct containers on the right for this configuration.
Answer:
Explanation:
Explanation
Application profile---> VRF--> Bridge Domain---> EPG
NEW QUESTION 36
What must be configured to redistribute externally learned OSPF routes within the ACI fabric?
- A. BGP Route Reflector
- B. BGP Inter-leak Route Map
- C. Route Control Profile
- D. PIM Sparse Mode
Answer: C
NEW QUESTION 37
An engineer is implementing Cisco ACI at a large platform-as-a-service provider using APIC controllers, 9396PX leaf switches, and 9336PQ spine switches. The leaf switch ports are configured as IEEE 802.1p ports. Where does the traffic exit from the EPG in IEEE 802.1p mode in this configuration?
- A. from leaf ports tagged as VLAN 4094
- B. from leaf ports untagged
- C. from leaf ports tagged as VLAN 1
- D. from leaf ports tagged as VLAN 0
Answer: D
NEW QUESTION 38
An engineer must implement management policy and data plane separation in the Cisco ACI fabric. Which ACI object must be created in Cisco APIC to accomplish this goal?
- A. Application profile
- B. Tenant
- C. Bridge domain
- D. Contract
Answer: B
NEW QUESTION 39
An engineer is implementing a connection that represents an external bridged network. Which two configurations are used? (Choose two.)
- A. Static path binding
- B. Layers 2 internal
- C. Layer 2 remote fabric
- D. VXLAN outside
- E. Layer 2 outside
Answer: C,E
Explanation:
Section: External Network Connectivity
NEW QUESTION 40
......
Cisco 300-620 Exam Practice Test Questions: https://www.testkingpdf.com/300-620-testking-pdf-torrent.html
300-620 Dumps 2022 - New Cisco 300-620 Exam Questions: https://drive.google.com/open?id=1mQ47MtQqWepLsD7fhUCZp2Wrh9kCdf6U
