Ultimate Guide to Prepare NSE6_FNC-8.5 Certification Exam for NSE 6 Network Security Specialist in 2021
Use Real NSE6_FNC-8.5 Dumps - Fortinet Correct Answers updated on 2021
Network Security Specialist Fortinet NSE6_FNC-8.5 Professional Exam Certification Path
Test Preparation teaches how the exam questions can to be decoded. Our Exam Preparedness: Network Security Specialist Fortinet NSE6_FNC-8.5â Technical arrangement course is delivered in multiple configurations: study hall preparing for learning or taking an interest in a physical homeroom with an NSE6 Approved Learner. Free media preparing for learning whenever it is suitable for you. The course surveys test inquiries in each branch of knowledge and how the themes tried ought to be seen to such an extent that off base answers are easier to stay away from. Our course will help you in tracking down the correct answers.
Learning Path:
- Learn Use of FortiMAil for protection from existing email borne threats
- Learn FortiPresence
- Learn Configuring FortiVoice system
- Learn FortiPlanner
- Learn Layer 4 and Layer 7 server load balancing
- Learn FortiAP
- Learn Link load balancing
- Learn FortiWiFi
- Learn Advancing Routing
- Learn Use of FortiSandbox for protection from emerging threats
- Learn FortiAPCloud
- Learn FortiGate
- Learn Designing, implementing and maintaining a basic, single channel FortiWLC based wireless network
- Learn High Availability
- Learn Global Load balancing
- Learn Firewall Policies
NEW QUESTION 10
During the on-boarding process through the captive portal, why would a host that successfully registered remain stuck in the Registration VLAN? (Choose two.)
- A. There is another unregistered host on the same port.
- B. The ports default VLAN is the same as the Registration VLAN.
- C. The wrong agent is installed.
- D. Bridging is enabled on the host
Answer: B,C
Explanation:
Explanation
Scenario 4: NAT detection disabled, using endpoint compliance policy and agent.
NEW QUESTION 11
Which two methods can be used to gather a list of installed applications and application details from a host? (Choose two.)
- A. MDM integration
- B. Application layer traffic inspection
- C. Portal page on-boarding options
- D. Agent technology
Answer: A,C
Explanation:
Explanation/Reference: https://developer.apple.com/business/documentation/MDM-Protocol-Reference.pdf
https://docs.oracle.com/en/middleware/idm/identity-governance/12.2.1.3/omusg/managing-application- onboarding.html#GUID-4D0D5B18-A6F5-4231-852E-DB0D95AAE2D1
NEW QUESTION 12
How are logical networks assigned to endpoints?
- A. Through network access policies
- B. Through FortiGate IPv4 policies
- C. Through device profiling rules
- D. Through Layer 3 polling configurations
Answer: B
Explanation:
Explanation/Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/9819/viewing-and-controlling- network-risks-via-topology-view
NEW QUESTION 13
Which two of the following are required for endpoint compliance monitors? (Choose two.)
- A. Security rule
- B. Custom scan
- C. Logged on user
- D. Persistent agent
Answer: A,B
NEW QUESTION 14
Where are logical network values defined?
- A. In the security and access field of each host record
- B. In the port properties view of each port
- C. On the profiled devices view
- D. In the model configuration view of each infrastructure device
Answer: C
NEW QUESTION 15
What causes a host's state to change to "at risk"?
- A. The host is not in the Registered Hosts group.
- B. The host has been administratively disabled.
- C. The host has failed an endpoint compliance policy or admin scan.
- D. The logged on user is not found in the Active Directory.
Answer: C
Explanation:
Failure - Indicates that the host has failed the scan. This option can also be set manually. When the status is set to Failure the host is marked "At Risk" for the selected scan.
Reference: https://docs.fortinet.com/document/fortinac/8.3.0/administration-guide/241168/host-health-and- scanning
NEW QUESTION 16
Where are logical network values defined?
- A. In the port properties view of each port
- B. On the profiled devices view
- C. In the security and access field of each host record
- D. In the model configuration view of each infrastructure device
Answer: C
NEW QUESTION 17
What causes a host's state to change to "at risk"?
- A. The host is not in the Registered Hosts group.
- B. The host has been administratively disabled.
- C. The host has failed an endpoint compliance policy or admin scan.
- D. The logged on user is not found in the Active Directory.
Answer: C
Explanation:
Explanation
Failure - Indicates that the host has failed the scan. This option can also be set manually. When the status is set to Failure the host is marked "At Risk" for the selected scan.
NEW QUESTION 18
What would happen if a port was placed in both the Forced Registration and the Forced Remediation port groups?
- A. Only al-risk hosts would be impacted.
- B. Both types of enforcement would be applied.
- C. Both enforcement groups cannot contain the same port.
- D. Only rogue hosts would be impacted.
Answer: C
NEW QUESTION 19
What capability do logical networks provide?
- A. VLAN-based inventory reporting
- B. Autopopulation of device groups based on point of connection
- C. Application of different access values from a single access policy
- D. Interactive topology view diagrams
Answer: A
Explanation:
NTM also includes reporting utilities such as network and inventory reports. You can generate reports for subnets, switch ports, and VLANs.
Reference: https://logicalread.com/network-diagram/#.YBk9ZOgzbIU
NEW QUESTION 20
What agent is required in order to detect an added USB drive?
- A. Dissolvable
- B. Persistent
- C. Mobile
- D. Passive
Answer: B
Explanation:
Explanation
Expand the Persistent Agent folder. Select USB Detection from the tree.
NEW QUESTION 21
Which two methods can be used to gather a list of installed applications and application details from a host?
(Choose two)
- A. Portal page on-boarding options
- B. MDM integration
- C. Agent technology
- D. Application layer traffic inspection
Answer: A,D
NEW QUESTION 22
Where do you look to determine what network access policy, if any, is being applied to a particular host?
- A. The network access policy configuration
- B. The Policy Details view for the host
- C. The Port Properties view of the hosts port
- D. The Policy Logs view
Answer: D
NEW QUESTION 23
Which connecting endpoints are evaluated against all enabled device profiling rules?
- A. All hosts, each time they connect
- B. Rogues devices, only when they connect for the first time
- C. Known trusted devices each time they change location
- D. Rogues devices, each time they connect
Answer: C
Explanation:
Explanation
FortiNAC process to classify rogue devices and create an organized inventory of known trusted registered devices.
NEW QUESTION 24
In which view would you find who made modifications to a Group?
- A. The Admin Auditing view
- B. The Security Events view
- C. The Event Management view
- D. The Alarms view
Answer: A
Explanation:
Explanation
It's important to audit Group Policy changes in order to determine the details of changes made to Group Policies by delegated users.
NEW QUESTION 25
......
NSE 6 Network Security Specialist -NSE6_FNC-8.5 Exam-Practice-Dumps: https://www.testkingpdf.com/NSE6_FNC-8.5-testking-pdf-torrent.html
