Updated Dec-2025 Exam Engine or PDF for the 300-535 Tests Free Updated Today!
Ultimate Guide to Prepare 300-535 with Accurate PDF Questions
The Cisco 300-535 exam consists of approximately 60-70 questions, which the candidate needs to complete within 90 minutes. The questions are vary in format and range from multiple-choice to simulation and drag-and-drop. 300-535 exam questions evaluate the candidate's ability to understand the concept of networking, identify and resolve complex network issues, operate Cisco collaboration solutions, and build custom applications using Cisco's various automation tools. Successful candidates are recognized as having the skills and expertise required for automating and programming Cisco collaboration solutions to deliver high-quality results to their clients.
Cisco 300-535 exam covers a wide range of topics, including collaboration application programming interfaces (APIs), network automation, software development, and collaboration platforms. Candidates are expected to have an in-depth understanding of these topics to pass the exam. 300-535 exam consists of 60-70 multiple-choice and simulation questions and lasts for 90 minutes.
Cisco 300-535 exam is an essential certification for IT professionals involved in deploying and managing Cisco Collaboration Solutions. With emerging technologies revolutionizing the way businesses collaborate and innovative solutions being introduced regularly, 300-535 exam is an excellent way for professionals to stay current in their field and demonstrate their proficiency in the latest technologies to potential employers.
NEW QUESTION # 67
Which of the following three statements are correct regarding IPv6 QoS? (Choose three.)
- A. IPv6 QoS features are configured using the modular QoS CLI on Cisco routers.
- B. The traffic class field in the IPv6 header can be used to set specific precedence or DSCP values.
- C. A 20-bit flow label field enables per-flow processing.
- D. DS-TE is not supported by IPv6.
- E. Per-hop behavior in IPv6 networks is based on EXP bits.
Answer: A,B,C
Explanation:
http://www.cisco.com/en/US/technologies/tk648/tk872/technologies_white_paper0900aecd8026004d.pdf Cisco Systems. IPv6 QoS AT-A-GLANCE RFC 2460/3697 Currently IPv6 provides support for QoS marking via a field in the IPv6 header.
Similar to the type of service (ToS) field in the IPv4 header, the traffic class field (8 bits) is available for use by originating nodes and for forwarding routers to identify and distinguish between different classes or priorities of IPv6 packets.
Current Cisco IOS Software support for IPv6 QoS includes:
Packet classification
Queuing (includes LLQ; excludes legacy PQ/CQ)
Traffic shaping
WRED
IPv6 also has a 20-bit field known as the flow label field (RFC 3697). The flow label enables per flow processing for differentiation at the IP layer.
It can be used for special sender requests and is set by the source node.
The flow label must be modified by an intermediate mode.
Planned Cisco IOS Software support for IPv6 QoS includes:
Compressed Real-Time Protocol (cRTP)
Network-based application recognition (NBAR)
Committed access rate (CAR)
NEW QUESTION # 68
An IT team is managing the WAN connections for an enterprise that has multiple data centers globally. A platform is needed that includes the characteristics:
- builds abstracted data model of MPLS networks
- solution includes the topology
- support multivendor visibility
Which platform must be used?
- A. Cisco WAE
- B. Cisco NCS
- C. Cisco Crosswork
- D. Cisco UCS Manager
Answer: A
Explanation:
Cisco WAE (WAN Automation Engine) builds an abstracted data model of MPLS networks, provides a complete topology view, and supports multivendor visibility for WAN environments.
NEW QUESTION # 69
Refer to the exhibit.
Which HTTP authentication mechanism is being used?
- A. simple
- B. token
- C. OAuth
- D. basic
Answer: D
NEW QUESTION # 70
What are two advantages of using Python virtual environments? (Choose two.)
- A. They allow for multiple virtual machines to share a single Python environment.
- B. They allow for all Python projects to utilize the same set of shared dependencies.
- C. They allow for multiple Python projects to use different versions of the same dependency without conflict.
- D. They allow for isolated environments where each can use a different version of Python.
- E. They allow multiple Python applications to share virtual memory between subprocesses.
Answer: C,D
NEW QUESTION # 71
Refer to the exhibit.
After this operation, what else is needed to change the hostname of the router to IOS-XR- SJC-19?
- A. <commit>
- B. <close-session>
- C. <get-config>
- D. <confirm>
Answer: A
NEW QUESTION # 72
What are two characteristics of the NFV architecture approach? (Choose two.)
- A. It is specially designed for telecommunications service providers.
- B. It decouples the network functions from proprietary hardware appliances.
- C. It is specially designed for Internet providers.
- D. It provides 70% more efficiency of network infrastructure.
- E. It typically includes a hypervisor.
Answer: B,E
NEW QUESTION # 73
A network engineer is implementing a new network using NETCONF. The goal is to automate but also harden the device configuration. Which NETCONF action must be used to accomplish this goal?
- A. Enable CoPP.
- B. Configure by using the ip http secure-server command.
- C. Limit access to port 830, well-known clients, and SSH VTY.
- D. Specify the source interface for SSH.
Answer: C
Explanation:
To securely automate device configuration with NETCONF, limit access to port 830, restrict connections to well-known clients, and use only SSH VTY for NETCONF sessions.
NEW QUESTION # 74
Refer to the partial Cisco IOS XR configurations exhibit for Router 1 and Router 2.
There are two routers that are connected back to back over the Gigabit Ethernet link. If the "show mpls ldp neighbor" command output on Router 1 does not show LDP peering with Router 2, what could be the possible root cause of the LDP peering problem?
- A. password for LDP session mismatch on Router 1 and Router 2
- B. hello timers mismatch on Router 1 and Router 2
- C. MPLS LDP session protection is not configured
- D. missing interface under OSPF IGP configuration
Answer: D
Explanation:
Explanation
NEW QUESTION # 75
Refer to the exhibit. Using the Cisco-IOS-XR-ipv6-nd-oper.yang model tree, what is the sensor- path configuration on the router?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
This path follows the YANG model tree in the exhibit, traversing from the root (ipv6-node- discovery) down through nodes/node, neighbor-interfaces/neighbor-interface, and finally to host- addresses/host-address.
NEW QUESTION # 76
Drag and Drop Question
Drag and drop the steps from the left into the correct order on the right to deploy an already created service into NSO. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 77
What tool is used to perform a "what if" failure analysis in a service provider network that is running Segment Routing?
- A. Cisco Segment Routing Path Computation Element
- B. Cisco WAN Automation Engine
- C. Cisco Network Services Orchestrator
- D. Cisco Evolved Programmable Network Manager
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/products/routers/wan-automation-engine/index.html
NEW QUESTION # 78
Drag and Drop Question
The YANG BGP service model is used to configure one or multiple loopback interfaces on routers in a network for iBGP and eBGP sessions. Drag and drop the code snippets from the bottom onto the blanks in the code to ensure that IP addresses are unique on individual routers and network- wide. Not all options are used. The exhibit does not show the entire code.
Answer:
Explanation:
Explanation:
First box (unique): ip
Second box (must): count (/bgp:bgp[device!=current()/../../device]/loopback/ip=current())=0 The unique ip; statement ensures each IP is unique within the loopback list for a device.
The must statement enforces that the loopback IP does not appear on any other device, making it unique network-wide.
NEW QUESTION # 79
Which two commands generate a template using Cisco NSO to build a service package?
(Choose two.)
- A. show running-config devices device ce-ios config ios:interface Loopback 0 | display xml | save template.xml
- B. show running-config devices device ce-ios config ios:interface Loopback 0 | display xml
- C. show running-config devices device ce-ios config ios:interface Loopback 0 | display template.xml
- D. request running-config devices device ce-ios config ios:interface Loopback 0 | display xml
- E. show running-config devices device ce-ios config ios:interface Loopback 0
Answer: A,B
NEW QUESTION # 80
Which two operations must be used to allow a network engineer to use NETCONF to configure and manage networking devices? (Choose two.)
- A. <close-session>
- B. <get-config>
- C. <put>
- D. <remove-config>
- E. <open-session>
Answer: A,B
NEW QUESTION # 81
Refer to the exhibit.
After this operation, what else is needed to change the hostname of the router to IOS-XR- SJC-19?
- A. <commit>
- B. <close-session>
- C. <get-config>
- D. <confirm>
Answer: A
NEW QUESTION # 82
An engineer is deploying a Python script to manage network devices through SSH. Which library based on Paramiko is used?
- A. sshmiko
- B. paramiko.agent
- C. netmiko
- D. libssh2
Answer: C
Explanation:
Reference: https://pynet.twb-tech.com/blog/automation/netmiko.html
NEW QUESTION # 83
Refer to the exhibit.
What must be added after the last line of the Ansible playbook to check if the output contains "IOS-XR"?
- A. wait_for: result[1] contains "IOS-XR"
- B. wait_for_connection:
- C. notify: "IOS-XR"
- D. wait_for: result[0] contains IOS-XR
Answer: D
NEW QUESTION # 84
What are two characteristics of the NFV architecture approach? (Choose two.)
- A. It is specially designed for telecommunications service providers.
- B. It decouples the network functions from proprietary hardware appliances.
- C. It is specially designed for Internet providers.
- D. It provides 70% more efficiency of network infrastructure.
- E. It typically includes a hypervisor.
Answer: B,E
Explanation:
Reference: https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2016/pdf/LTRSPM-2022.pdf
NEW QUESTION # 85
An engineer wants to replace the BLOCK_BAD ACL on the Cisco IOS XE router with this new content. The engineer wants to use RESTCONF for this and constructs a PUT request to the resource/restconf/data/ native/ip/access-list/Cisco-IOS-XE-acl:extended=BLOCK_BAD. What must the body look like to achieve the Cisco IOS XE configuration?
Desired configutation:
ip access-list extended BLOCK_BAD
permit ip any host 192.168.20.1
deny ip any any
- A.
- B.
- C.
- D.
Answer: A
Explanation:
Section: 2.0 Automation APIs and Protocols
NEW QUESTION # 86
When using Cisco YDK, which syntax configures the BGP ASN using OpenConfig BGP?
- A. bgp.config.as_ = 65000
- B. bgp.global_.config.as_ = 65000
- C. bgp.global_.config.as = 65000
- D. bgp.global.config.as_ = 65000
Answer: B
Explanation:
Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKNMS-2032.pdf
NEW QUESTION # 87
After a configuration request is sent using NETCONF, which call releases any locks and resources associated with the session?
- A. <close-session>
- B. <close-activity>
- C. <exit-operation>
- D. <boot-app>
Answer: A
Explanation:
Section: 3.0 Network Device Programmability
Explanation/Reference: https://tools.ietf.org/html/rfc6241
NEW QUESTION # 88
......
Pass Cisco With TestkingPDF Exam Dumps: https://www.testkingpdf.com/300-535-testking-pdf-torrent.html
Fully Updated 300-535 Dumps - 100% Same Q&A In Your Real Exam: https://drive.google.com/open?id=1_iEDTeT1MsTEkBMdSSWm53bEwU2n8L7D
