Verified C-HAMOD-2404 dumps Q&As - Pass Guarantee Exam Dumps Test Engine [2025]
C-HAMOD-2404 dumps and 82 unique questions
NEW QUESTION # 41
What is a calculation view query snapshot?
- A. A bookmark of a frequently used navigation state of a query result
- B. The results of a query generated by a front end tool on a calculation view
- C. A record of the query statement executed on a calculation view
- D. The stored results of a query on a calculation view
Answer: C
NEW QUESTION # 42
Why would you use the Transparent Filter property in a calculation view?
- A. To prevent filtered columns from producing incorrect aggregation results.
- B. To allow filter push-down in stacked calculation views
- C. To ignore a filter applied to a hidden column
- D. To improve filter performance in join node
Answer: B
Explanation:
TheTransparent Filterproperty is used in SAP HANA to allow filter push-down in stacked calculation views.
This ensures that filters applied to one layer of the view are propagated to underlying views, enhancing performance by reducing the volume of data processed at higher levels.(Reference: SAP HANA Transparent Filter Guide)
NEW QUESTION # 43
You have configured static cache for your calculation view and run a query against it, but the cache results are not being used.What might be the reason for this?
- A. You did not define a filter in the cache setting.
- B. The cache data retention period has expired.
- C. The query requests only a subset of the cached results.
- D. You did not define any columns in the cache setting.
Answer: D
NEW QUESTION # 44
What are the characteristics of a SHARED replica table? Note: There are 3 correct answers to this question.
- A. You do not need to create the physical replica table manually
- B. You can toggle queries routing between remote table data and replica table data
- C. You can choose your own replica table name
- D. The consuming application always references the virtual table
- E. The replica table always stores real-time data
Answer: A,B,E
Explanation:
The characteristics of aSHARED replica tableinclude:
* B. The replica table always stores real-time data: Ensures synchronization with the source table.
* D. You can toggle queries routing between remote table data and replica table data: Flexibility in query routing allows efficient use of data.
* E. You do not need to create the physical replica table manually: It is automatically created during the replication setup.
Virtual tables (A) are not referenced directly by consuming applications, and replica table naming (C) is typically system-defined.
NEW QUESTION # 45
You define a hierarchy in a calculation view. You want to expose the hierarchy to SQL. Which of the following conditions must be met? Note: There are 2 correct answers to this question.
- A. The hierarchy must be a parent-child hierarchy.
- B. The hierarchy must be defined as a local hierarchy.
- C. The hierarchy must be exposed by a CUBE calculation view with star join.
- D. The hierarchy must be a shared hierarchy.
Answer: C,D
NEW QUESTION # 46
Why would you partition a table in an SAP HANA Cloud database? Note: There are 2 correct answers to this question.
- A. To improve data replication performance on large row tables
- B. To improve response time when multiple users access the same table
- C. To improve query performance when accessing large column tables
- D. To overcome the 2 billion record limit
Answer: D
NEW QUESTION # 47
What is a calculation view query snapshot?
- A. A bookmark of a frequently used navigation state of a query result
- B. The results of a query generated by a front end tool on a calculation view
- C. A record of the query statement executed on a calculation view
- D. The stored results of a query on a calculation view
Answer: C
Explanation:
Acalculation view query snapshotis arecord of the query statement executedon a calculation view. It captures the SQL query or execution details for analysis or troubleshooting purposes.
4
NEW QUESTION # 48
In a calculation view, your table function node executes a table function that requires input parameters. How can you fill the input parameters of the table function? Note: There are 3 correct answers to this question.
- A. Assign a hierarchy node.
- B. Define constant values.
- C. Create and map an input parameter
- D. Map columns from lower nodes.
- E. Reference the output of a procedure.
Answer: B,C,D
NEW QUESTION # 49
Which database features are typically NOT required by analytical applications that run on SAP HANA Cloud?Note: There are 2 correct answers to this question.
- A. Stored procedures
- B. Indexes
- C. Table partitions
- D. Pre-calculated aggregates
Answer: A,D
NEW QUESTION # 50
You combine two tables in a join node using multiple columns in each table.
Why do you enable the dynamic join option? Note: There are 2 correct answers to this question.
- A. To allow data analysis at different levels of granularity with the same calculation view
- B. To ensure that the join execution uses only the join columns requested in the query
- C. To force the calculation at the relevant level of granularity, even if this level is not the grouping level defined by the query
- D. To ensure that the aggregation always happens after the join execution
Answer: A,B
Explanation:
TheDynamic Joinoption in SAP HANA calculation views enables flexibility when joining tables with multiple columns. The reasons for enabling it include:
* B. To allow data analysis at different levels of granularity with the same calculation view:
Dynamic joins adjust to the query's granularity requirements, enabling analysis at various levels without redesigning the calculation view.
* D. To ensure that the join execution uses only the join columns requested in the query: This ensures efficient execution by only processing the relevant columns, reducing unnecessary computations.
NEW QUESTION # 51
Which tool generates and executes the SQL for a specific node of your calculation view?
- A. SQL analyzer
- B. Database explorer
- C. Debug Query mode
- D. Explain plan
Answer: C
NEW QUESTION # 52
Which of the following tasks are necessary to implement data replication?Note: There are 3 correct answers to this question.
- A. Create a remote subscription
- B. Create a virtual table
- C. Enable the linked database feature
- D. Create a target table
- E. Define a flowgraph
Answer: A,B,D
Explanation:
Implementing data replication involves these steps:
* B. Create a remote subscription: Captures changes from the source system.
* C. Create a target table: Stores replicated data in the target system.
* E. Create a virtual table: Establishes access to the remote data source.
Enabling the linked database feature (A) and defining a flowgraph (D) are useful for related tasks but are not mandatory for replication.
NEW QUESTION # 53
Why would you enable Debug Query mode in a calculation view?
- A. To check which database engines are invoked
- B. To identify data sources that are not accessed by a query
- C. To set breakpoints and step through the execution
- D. To understand how tables are partitioned
Answer: B
NEW QUESTION # 54
What are some of the restrictions that apply when defining parallelization blocks in calculation views? Note: There are 2 correct answers to this question.
- A. Multiple blocks can be defined only within a single calculation view.
- B. The block must have only one start node.
- C. The block must start with a node that defines a table as a data source.
- D. Only one block can be defined across a stack of calculation views.
Answer: C,D
NEW QUESTION # 55
Why would you use the Transparent Filter property in a calculation view?
- A. To allow filter push-down in stacked calculation views
- B. To apply filters that are hidden from the end user
- C. To include columns that are NOT requested by a query
- D. To avoid columns being unnecessarily used in an aggregation
Answer: D
NEW QUESTION # 56
What is the default view node for a cube?
- A. UNION
- B. SEMANTICS
- C. AGGREGATION
- D. PROJECTION
Answer: C
NEW QUESTION # 57
Why would you create calculation views of data category DIMENSION with type TIME?
- A. To add a temporal condition to a join to find matching records from two tables based on a date
- B. To store historical versions of attributes
- C. To provide the time intervals required by time-dependent parent-child hierarchies
- D. To provide additional time-related navigation possibilities
Answer: D
NEW QUESTION # 58
Why would you use parameter mapping in a calculation view?Note: There are 2 correct answers to this question.
- A. To assign variables to one or more attributes
- B. To convert the data types of input parameters
- C. To pass variable values to external value help views
- D. To push down filters to the lowest level calculation views
Answer: C,D
NEW QUESTION # 59
Which of the following are characteristics of the OPTIMIZED linked database feature? Note: There are 2 correct answers to this question.
- A. Hidden virtual tables are automatically created on the target system
- B. The source and target system must be SAP HANA
- C. A database name is used in an SQL statement to identify the remote object
- D. The metadata of remote tables is cached on the target system
Answer: B,D
Explanation:
TheOPTIMIZED linked databasefeature improves access to remote objects:
* A. The metadata of remote tables is cached on the target system: This reduces the overhead of fetching metadata repeatedly.
* C. The source and target system must be SAP HANA: This feature is designed specifically for SAP HANA systems for seamless integration.
Hidden virtual tables (B) are not automatically created, and explicit database names (D) are not required.
NEW QUESTION # 60
In your calculation view, you want to consume a custom data source defined using SQLScript. In which type of object do you write your code?
- A. Procedure
- B. Table function
- C. Scalar function
- D. Anonymous block
Answer: B
Explanation:
To consume a custom data source defined using SQLScript, you write the SQLScript logic in atable function.
Table functions are used to return tabular data, which can then be consumed in calculation views for further processing and analysis.
NEW QUESTION # 61
Two calculation views, A and B, are defined as shown in the diagram. Three analytic privileges have been granted to you. When you preview calculation view A, what data do you see?
- A. US for P1 and GE for P1
- B. US for P1 and P2, and GE for P1 and P2
- C. US for P1 and P2, and GE for P2
- D. US for P1
Answer: D
Explanation:
Given the diagram (assumed context) and the analytic privileges (P1 and P2):
* Data visible forUS with P1is allowed, as P1 explicitly includes this region.
* No other combinations are permissible based on the defined privileges and hierarchy of calculation views.
This restricts the output toUS for P1 only.
NEW QUESTION # 62
You have imported a new calculation view into a folder that contains an .hdinamespace file. This calculation view consumes one data source, which is a table. When trying to build the calculation view, the build fails with a namespace-related issue.What could be the reason? Note: There are 2 correct answers to this question.
- A. The imported calculation view and its data source have different namespaces.
- B. An .hdinamespace file is defined in the src folder that specifies a different namespace property than the one in the identifier of the calculation view.
- C. The namespace used within the calculation view to reference the table is different from the actual namespace in the identifier of this table.
- D. The .hdinamespace specifies "sub-folder":"append", so calculation views can only be created in subfolders.
Answer: A,C
Explanation:
A build failure with a namespace-related issue often occurs because:
* B. The imported calculation view and its data source have different namespaces: Both must match for the view to reference the table correctly.
* C. The namespace used in the calculation view to reference the table is different from the actual namespace in the table's identifier: The reference must exactly match the namespace in the table definition.
The issue is unrelated to sub-folder rules (A) or differing.hdinamespacefiles (D).
NEW QUESTION # 63
Which tool generates and runs the SQL for a specific node of your calculation view?
- A. SQL analyzer
- B. Database explorer
- C. Debug Query mode
- D. Explain plan
Answer: C
NEW QUESTION # 64
Why would you choose to implement a referential join?
- A. To develop a series of linked joins
- B. To ignore unnecessary data sources
- C. To automate the setting of cardinality rules
- D. To reuse the settings of an existing join
Answer: B
NEW QUESTION # 65
You combine two customer master data tables with a union node in a calculation view. Both master data tables include the same customer name. How do you ensure that each customer name appears only once in the results?
- A. In the union node, map both source customer name columns to one target column.
- B. Define a restricted column in a union node.
- C. Include an aggregation node above the union node.
- D. Add an intersect node above the union node.
Answer: C
Explanation:
To ensure that each customer name appears only once in the results when combining two tables using a union node, anaggregation nodeshould be added above the union node. The aggregation node consolidates duplicate entries by grouping the data based on unique customer names, effectively removing duplicates.
NEW QUESTION # 66
......
C-HAMOD-2404 Dumps for Pass Guaranteed - Pass C-HAMOD-2404 Exam: https://www.testkingpdf.com/C-HAMOD-2404-testking-pdf-torrent.html
C-HAMOD-2404 Exam Dumps - Try Best C-HAMOD-2404 Exam Questions: https://drive.google.com/open?id=13apzsEz1zzl4lgvdlBXp7RlKVGM_pvvL
