Positive Aspects of Valid Dumps ATM Exam Dumps! [Feb-2024]
First Attempt Guaranteed Success in ATM Exam 2024
Learning Objectives for ISTQB ATM Certification Test
The candidates who want to get the ISTQB ATM designation should demonstrate that they have the following abilities:
- Explaining the importance of timely and accurate information collection during the testing process.
- Using traceability for checking consistency and completeness that meet the conditions of the test and also explaining the facts that can influence the detail level as well as the disadvantages and advantages for specific test conditions.
- Summarizing the four groups for test closure activities and implementing a project retrospective to discover improvement areas and evaluating processes.
- Analyzing the system’s test needs for planning work products and test activities that will help them meet the necessary objectives.
- Utilizing traceability to monitor the test progress and follow completeness and consistency standards and meet test objectives, plan, and strategy.
Candidates who wish to take the ISTQB ATM certification exam are recommended to have at least three years of experience in software testing. They should also have completed the ISTQB Certified Tester Foundation Level and ISTQB Certified Tester Advanced Level - Technical Test Analyst certifications. To prepare for the exam, candidates can take training courses offered by ISTQB accredited training providers.
NEW QUESTION # 21
Which of the following statements about management of product quality risks in mature
organizations with respect to the lifecycle, is true?
K2 1 credit
- A. Mature organizations are aware that the contribution of testing to analysis of product
quality risks is very important. The analysis should occur throughout the entire lifecycle - B. Mature organizations are aware that risk management of product quality risks only
occurs during testing - C. Mature organizations address product quality risks associated to non-functional
characteristics only during the system test phase - D. Mature organizations don't waste time identifying the sources of risks. They only focus
on identifying product quality risks
Answer: A
NEW QUESTION # 22
The following are the exit criteria described in the test plan of a software product:
EX1. The test suite for the product must ensure that at least each quality risk item is covered by at least one test case (a quality risk item can be covered by more test cases).
EX2. All test cases in the test suite must be run during the execution phase.
EX3. Defects are classified into two categories: "C" (critical defect) and "NC" (non-critical defect). No known C defects shall exist in the product at the end of the test execution phase.
Which of the following information is useless when the specified exit criteria is evaluated?
- A. A traceability matrix showing the relationships between the product risk items and the test cases
- B. The execution status of all the test cases extracted from the test management tool
- C. A chart, showing the trend in the lag time from defect reporting to resolution, extracted from the defect tracking system
- D. A list of all the open defects with the associated classification information extracted from the defect tracking system
Answer: C
Explanation:
Section: Testing Process
Explanation/Reference:
NEW QUESTION # 23
Assume you are managing a test automation project for a mission-critical system.
Because vendor provided tools and open source solutions don't meet the needs of this project, you ask your test team to develop a custom automation framework.
Which of the following management issues associated to the development of this custom automation framework is least likely to manage?
- A. The custom automation framework will need proper maintenance
- B. Proper testing for the custom automation framework must be performed
- C. The changes to the custom automation framework should be communicated to all external users of this tool under the GNU license
- D. The custom automation framework will require an adequate documentation
Answer: C
Explanation:
Section: Test Tools and Automation
Explanation/Reference:
NEW QUESTION # 24
Assume you are a Test Manager involved in system testing of a CRM application for a Pay-TV company.
Currently the application is able to support a proper number of users assuring the required responsiveness. Since the business is expected to grow, you have been asked to evaluate the ability of the application to grow to support more users while maintaining the same responsiveness.
Which of the following tools would you expect to be the most useful at performing this evaluation?
- A. Coverage tools
- B. Static analysis tools
- C. Performance tools
- D. Test management tools
Answer: C
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 25
You are managing the system testing for a SOA based system. The integrated system consists of several subsystems:
- A SOA middleware
- A CRM (Customer Relationship Management) system
- A BRM (Billing and Revenue Management) system
- A SMS (Subscriber Management System) system and you performed a risk analysis based on these subsystems.
At the end of the scheduled period for test execution you produce a first classical report based on the traditional metrics of testing. Test pass/fail status and bug status (open/resolved) That table provides you a distorted picture of the quality risk, because there is no indication of the risk level of the failed tests, the tests not run, or the open bugs. Thus, you produce the following table to solve this distortion issue:
In the table above, where you have introduced the concept of risk weighting, the highest risk test or bug report has a score of 1, while the lowest risk test or bug report has a score of 0.04.
Which of the following subsystems, based on the risk scores of the table, is most risky?
- A. CRM
- B. BRM
- C. SOA
- D. SMS
Answer: A
Explanation:
Section: Test Management
Explanation/Reference:
NEW QUESTION # 26
You are performing a quality risk analysis for a CSCI (Computer Software Configuration Item) used to implement a CBIT (Continuous Built-In Test) module of a safety-critical system.
During the quality risk analysis you are trying to identify the ways in which failures of the CBIT module can occur, for each of them trying to determine the potential causes and likely effects, and the risk level (calculated as the product of three factors: severity, occurrence and detection).
Which of the following risk analysis techniques are you working with?
- A. Failure Mode and Effect Analysis
- B. Wide Band Delphi
- C. Cost of Exposure
- D. A lightweight product risk analysis technique
Answer: A
Explanation:
Section: Test Management
Explanation/Reference:
NEW QUESTION # 27
Assume that you are the Test Manager for a small insurance application development project.
You have decided to adopt a risk-based testing strategy: 5 product risks (R1, R2, R3, R4, R5) have been identified and their levels of risk have been assessed. 10 test cases (T1, ..., T10) have been designed to cover all the product risks.
The following table shows the risk level and the test cases associated to the identified product risks (higher risk level means higher risk):
You are not confident with the assessment of the risk level and you suspect that it will be possible to find high- priority bugs in low-risk areas.
Furthermore the period for test execution is very short. Your goal is to test all the product risks in a risk-based way, while assuring that each product risk gets at least some amount of testing.
Which of the following answers describes the best test execution schedule in this scenario?
- A. T10, T8, T6, T4, T2, T9, T7, T5, T3, T1
- B. T1, T3, T5, T7, T9, T2, T4, T6, T8, T10
- C. T1, T2, T3, T4, T5, T6, T7, T8, T9, T10
- D. T10, T9, T8, T7, T6, T5, T4, T3, T2, T1
Answer: B
Explanation:
Section: Testing Process
Explanation/Reference:
NEW QUESTION # 28
Assume you are the Test Manager for a new software release of an e-commerce
application.
The server farm consists of six servers providing different capabilities. Each capability is
provided through a set of web services.
The requirements specification document contains several SLAs
(Service Level Agreements) like the following:
SLA-001: 99.5 percent of all transactions shall have a response time less than five seconds
under a load of up-to 5000 concurrent users
The main objective is to assure that all the SLAs specified in the requirements specification
document will be met before system release. You decide to apply a risk-based testing
strategy and an early risk analysis confirms that performance is high risk. You can count on
a well-written requirements specification and on a model of the system behavior under
various load levels produced by the system architect.
Which of the following test activities would you expect to be the less important ones to
achieve the test objectives in this scenario?
K4 3 credits
- A. Perform unit performance testing for each single web service
- B. Monitor the SLAs after the system has been released into the production environment
- C. Perform static performance testing by reviewing the architectural model of the system
under various load levels - D. Perform system performance testing, consisting of several performance testing
sessions, to verify if all the SLAs have been met
Answer: B
NEW QUESTION # 29
Assume you have some data related to confirmation testing during system testing of a past project.
In that project 240 bug reports have been opened once, 80 were opened twice, 10 were opened three times and no bug reports have been opened more than three times.
You estimate that a bug report, which has failed its confirmation test, costs, on average, 3 person-hours.
Which of the following statements correctly describe the value of these confirmatory testing activities based on cost of quality?
- A. 340 person-hours have been spent on the project during the system testing phase, because of the failed confirmation tests and this cost belongs to the costs of internal failure
- B. 340 person-hours have been spent on the project during the system testing phase, because of the failed confirmation tests and this cost belongs to the costs of external failure
- C. 300 person-hours have been spent on the project during the system testing phase, because of the failed confirmation tests and this cost belongs to the costs of detection
- D. 300 person-hours have been spent on the project during the system testing phase, because of the failed confirmation tests and this cost belongs to the costs of internal failure
Answer: D
Explanation:
Section: Test Management
Explanation/Reference:
NEW QUESTION # 30
You are a Test Manager working for a software organization where reviews have never
been applied. After a meeting with your managers examining a business case for reviews,
(including their costs, benefits, and potential issues), the management finally decides to
adopt formal reviews for future projects.
You have been given a budget that you have spent to provide training in the review
process and to introduce the review process on a pilot project.
On that pilot project the introduction of reviews has been very positive in terms of positive
involvement from all the participants. All the reviews applied to different documents have
been very effective for their purposes (especially at revealing defects).
Which of the following answers describes an important success factor for the introduction
of formal reviews which is missing in this scenario?
K4 3 credits
- A. Participant support
- B. Training in the review process
- C. Definition and use of metrics to measure the ROI (Return On Investment)
- D. Management support
Answer: C
NEW QUESTION # 31
Which of the following would you expect to be most likely an example of a demotivating factor for testers?
- A. The management asks the testers to be kept informed about the intensity, quality and results of testing
- B. The testers' recommendations to improve the system or its testability are adopted by the development team
- C. Test quality is measured by counting the number of customer/user reported problems.
- D. The same regressions tests are manually executed by the same testers, for every product release, without regression test tools
- E. The testers are assessed on whether and how often they detect important and critical failures
Answer: C,D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 32
You are the Test Manager for a project to develop a client-server application that allows wine vendors to order custom-assorted packages of wines of several winemakers to sell special packages in their wine shops.
You decide to apply a blended risk-based and reactive testing strategy. Below the exit criteria for the system testing.
EXCR1- Each "critical" quality risk item must be covered by at least one test condition EXCR2- Each "critical" requirement must be covered by at least one test condition The following are the "critical" requirements of the application:
REQ-SEL-1. The application shall allow the user to order only one package at a time REQ-SEL-2. The application shall allow the user to select between four different packages (2-bottles, 6- bottles, 12-bottles, 15-bottles)
REQ-SEL-3. The application shall allow the user to order a package containing at least 1 bottle and no more bottles than the package size. No error messages shall be displayed if the user selects a valid number of bottles (at least 1 bottle and no more than the package size) REQ-SEL-4. The application shall display an error message "Invalid number of bottles" if an invalid number of bottles is selected by the user (zero bottles or a number higher than the package size) REQ-PAY-1. The application shall allow the user to pay with the three accepted credit cards (Visa, MasterCard, American Express)
REQ-PAY-2. The application shall display an error message "Invalid credit card" if invalid credit card data are given by the user
The following is the unique "critical" quality risk item that has been identified:
CR-RSK-1. The GUI of the application might accept non-integer values for the input field designed to get the number of bottles from the user
Test analysis for system testing has just begun and the following test conditions have been identified.
TC-SEL-2. Test the selection of the package sizes
TC-SEL-4. Test wrong numbers of bottles for an order
TC-CR-RSK-1. Test the accepted values from the input field designed to get the number of bottles from the user
Assume that you have used traceability to determine the logical test cases that cover all the requirements and the single risk item identified in that scenario.
Which of the following is a positive logical test that is complete and correct, and covers the REQ-SEL-4 requirement?
- A. Select a 6-bottles package, then try to insert 7 bottles
- B. Select a 6-bottles package, then try to insert 5 bottles; verify that no error messages are displayed
- C. Select a 6-bottles package, then try to insert 7 bottles; verify that no error messages are displayed
- D. Select a 6-bottles package, then try to insert 7 bottles; verify that the "Invalid number of bottles" message is displayed
Answer: D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 33
Which one of the following metrics to be produced needs traceability between the test cases and each item in a proper test basis?
- A. Mean time between failures for the system
- B. Requirements coverage
- C. Cumulative number of reported defects versus cumulative number of resolved defects
- D. Trends in the lag time from defect reporting to resolution
Answer: B
Explanation:
Section: Test Management
Explanation/Reference:
NEW QUESTION # 34
Assume you are managing the system testing phase of a project.
The system test execution period is scheduled to twenty weeks.
All tests are manual tests. You are following a risk-driven test approach.
During the last staff meeting the project manager tells you new deadlines that will not allow
completion of all the system tests.
Which of the following would you expect to be the best way to respond to this situation?
K2 1 credit
- A. Automate all remaining tests
- B. Remove testers from your test team, so that they can be assigned to other projects
- C. No action is needed, test as much as possible in the remaining time period
- D. Prioritize executing the tests for the highest product risks and track these risks
Answer: D
NEW QUESTION # 35
Which of the following statements best describes an appropriate approach for managing exploratory testing?
- A. Break the testing work in 30 to 120 minutes sessions and use properly defined mission statements consisting of two or three sentences to guide testing during these sessions
- B. Exploratory testing should not be managed because such testing is inherently unmanageable and not measurable
- C. Define very generic charters to drive exploratory testing sessions of 2 days where testers are completely free to decide what to test
- D. Define very detailed mission statements, which allow testing work to be broken into sessions of up to
10 minutes duration in which testing is guided by these mission statements
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 36
Which one of the following metrics to be produced needs traceability between the test
cases and each item in a proper test basis?
K2 1 credit
- A. Mean time between failures for the system
- B. Requirements coverage
- C. Cumulative number of reported defects versus cumulative number of resolved defects
- D. Trends in the lag time from defect reporting to resolution
Answer: B
NEW QUESTION # 37
The main objectives the senior management team wants to achieve are:
- to reduce the costs associated with dynamic testing
- to use reviews to ensure that the project is on course for success and following the plan
- to use reviews as a well-documented and effective bug-removal activity following a formal
process with well-defined roles
- to determine the effectiveness of reviews in terms of phase containment
- to improve phase containment effectiveness
Which of the following answers would you expect to describe the best way to achieve these
objectives?
K4 3 credits
- A. You should plan for lightweight exit-phase reviews at the end of each development and
testing phase, and plan for a process of gathering information from testing to perform an
analysis aimed at identifying the larger cluster of defects - B. You should plan for formal exit-phase reviews at the end of each development and
testing phase, and plan for a process of gathering information from testing to perform an
analysis of the bugs found during testing to determine the phase in which they have been
introduced - C. You should plan for formal exit-phase reviews at the end of each development phase
and testing phase, and plan for a process of gathering information from testing to perform
an analysis of the bugs found during testing to determine the people responsible for those
bugs - D. You should plan for formal exit-phase reviews at the end of each development and
testing phase, and plan for a process of gathering information from testing to perform an
analysis aimed at identifying the larger cluster of defects
Answer: B
NEW QUESTION # 38
Consider an agile team adopting Extreme Programming (XP) with five developers and one tester without any coding experience.
To which of the following activities would you expect the tester will contribute most?
- A. Developing unit tests
- B. Supporting the customer in the execution of acceptance testing
- C. Executing unit tests
- D. Planning and executing tests during the integration test phase to detect interface defects
Answer: B
Explanation:
Section: Test Management
Explanation:
NEW QUESTION # 39
You are the Test Manager of a new project that will have three formal levels of testing unit, integration and system testing. The testing strategy you decide to adopt a blend of risk-based testing and reactive testing strategies.
Which of the following answers describes the most consistent example of implementation of this test strategy during the execution of the system tests?
- A. Your test team executes exploratory tests following a session-based test management approach throughout the system test phase
- B. Your test team autonomously performs some exploratory testing sessions and, at the very end of the system testing phase, it also executes more system tests under the guidance of a sample of users
- C. Your test team executes system tests under the guidance of a sample of users throughout the system test phase
- D. Your test team executes scripted tests designed and implemented before the execution of the system test phase, to cover the identified product risks. It also performs exploratory testing sessions throughout the system test phase
Answer: D
Explanation:
Section: Test Management
Explanation
Explanation/Reference:
NEW QUESTION # 40
During the follow-up phase the following conditions are checked:
X1. The code has been completely reviewed
X2. All the identified defects have been correctly fixed and the modified code has been compiled successfully and run through all the static analyzers used by the project without warnings and errors X3. The modified code is available under the configuration management system with a new version number for the specified CI If these conditions are fulfilled then the review process terminates.
Which of the following characteristics of a formal review is missing in this description?
- A. Defined entry and exit criteria
- B. Metrics for reporting on the review effectiveness, efficiency, and progress
- C. Deliverables such as reports, evaluation sheets or other review summary sheets
- D. Checklists to be used by the reviewers
Answer: B
Explanation:
Section: Testing Process
Explanation:
NEW QUESTION # 41
Consider the following statements describing the importance of improving the test process:
I. Test process improvement is important because being focused only on the test process it can provide recommendations to improve the test process itself, but it can't indicate or suggest improvement to areas of the development process
II. Test process improvement is important because it is much more effective than software process improvement to improve the quality of a software system
III. Test process improvement is important because several process improvement models (STEP, TPI Next, TMMi) have been developed over the years
IV. Test process improvement is important because every organization, regardless of the context, should always achieve the maximum level of maturity of testing described in the test improvement models such as TMMi
Which of the following answers is correct?
- A. I and IV. are true; II. and III. are false
- B. I., II. and III are true; IV. is false
- C. I., II., III. and IV are false
- D. I., II. and III. are false; IV. is true
Answer: C
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 42
You are the Test Manager for a project to develop a client-server application that allows
wine vendors to order custom-assorted packages of wines of several winemakers to sell
special packages in their wine shops.
You decide to apply a blended risk-based and reactive testing strategy. Below the exit
criteria for the system testinG.
EXCR1- Each "critical" quality risk item must be covered by at least one test condition
EXCR2- Each "critical" requirement must be covered by at least one test condition
The following are the "critical" requirements of the application:
REQ-SEL-1. The application shall allow the user to order only one package at a time
REQ-SEL-2. The application shall allow the user to select between four different packages
(2-bottles, 6-bottles, 12-bottles, 15-bottles)
REQ-SEL-3. The application shall allow the user to order a package containing at least 1
bottle and no more bottles than the package size. No error messages shall be displayed if
the user selects a valid number of bottles (at least 1 bottle and no more than the package
size)
REQ-SEL-4. The application shall display an error message "Invalid number of bottles" if
an invalid number of bottles is selected by the user (zero bottles or a number higher than
the package size)
REQ-PAY-1. The application shall allow the user to pay with the three accepted credit
cards (Visa, MasterCard, American Express)
REQ-PAY-2. The application shall display an error message "Invalid credit card" if invalid
credit card data are given by the user
QUSTION NO: 11
The following is the unique "critical" quality risk item that has been identified:
CR-RSK-1. The GUI of the application might accept non-integer values for the input field
designed to get the number of bottles from the user
Test analysis for system testing has just begun and the following test conditions have been
identifieD.
TC-SEL-2. Test the selection of the package sizes
TC-SEL-4. Test wrong numbers of bottles for an order
TC-CR-RSK-1. Test the accepted values from the input field designed to get the number of
bottles from the user
Assume that you have used traceability to determine the logical test cases that cover all the
requirements and the single risk item identified in that scenario.
Which of the following is a positive logical test that is complete and correct, and covers the
REQ-SEL-4 requirement?
K3 2 credits
- A. Select a 6-bottles package, then try to insert 7 bottles; verify that the "Invalid number of
bottles" message is displayed - B. Select a 6-bottles package, then try to insert 7 bottles
- C. Select a 6-bottles package, then try to insert 5 bottles; verify that no error messages are
displayed - D. Select a 6-bottles package, then try to insert 7 bottles; verify that no error messages are
displayed
Answer: A
NEW QUESTION # 43
The following are the requirements identified as "critical":
REQ-SEL-001. The user shall be able to combine all the three products with all the four
durations to define an item to purchase
REQ-SEL-002. The user shall be able to add a maximum of six different items to the
shopping cart
REQ-PUR-001. The user shall be able to purchase all the items in the shopping cart using
a credit voucher
REQ-PUR-002. The user shall be able to purchase all the items in the shopping cart using
the available credit already charged on the smartcard
REQ-PUR-003. The user shall be able to purchase all the items in the shopping cart using
all the accepted credit cards (Visa, MasterCard and Great Wall Card)
REG-LOGO-001. The user shall be able to logout (by clicking the logout button) from both
the "select" and "purchase" pages going back to the "browse" page (anonymous
navigation)
Moreover the following quality risk item has been identified as "critical":
QR-P1. The web customer portal might not be able to provide the expected response time
(less than 10 sec) for the purchase transactions under a load of up-to 1000 concurrent
users
Test analysis for system testing has just begun and the following test conditions have been
identifieD.
TC-SEL-01. Test the combinations of products and durations to define an item to purchase
TC-SEL-02. Test the maximum number of items, which can be added to the shopping cart
TC-PUR-01. Test the purchase of an item
TC-PUR-02. Test the purchase of an item with the credit charged on the smartcard
What is the MINIMUM number of test conditions that must be added to fulfill both the
EXCR1 and EXCR2 exit criteria?
K3 2 credits
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 44
Which of the following is an example of the test closure activity indicated as "lessons learned"?
- A. Participate in a meeting at the end of a project aimed at better managing the events and problems of future projects
- B. Archive all the test results of the acceptance testing phase
- C. Deliver a list of the open defects of a software product released into production to the service desk team
- D. Deliver an automated regression test suite, used during the system test phase of a software product released into production, to the team responsible for maintenance testing
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 45
You are performing a quality risk analysis for a CSCI (Computer Software Configuration Item) used to implement a CBIT (Continuous Built-In Test) module of a safety-critical system.
During the quality risk analysis you are trying to identify the ways in which failures of the CBIT module can occur, for each of them trying to determine the potential causes and likely effects, and the risk level (calculated as the product of three factors: severity, occurrence and detection).
Which of the following risk analysis techniques are you working with?
- A. Failure Mode and Effect Analysis
- B. Wide Band Delphi
- C. Cost of Exposure
- D. A lightweight product risk analysis technique
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 46
......
Practice LATEST ATM Exam Updated 64 Questions: https://www.testkingpdf.com/ATM-testking-pdf-torrent.html
Real ATM Exam Questions are the Best Preparation Material: https://drive.google.com/open?id=1m3SEXM8F0SQ9n9pfsZaOJNQx51IWHGlX

