Pass Your DEA-5TT1 Dumps as PDF Updated on 2022 With 62 Questions
EMC DEA-5TT1 Real Exam Questions and Answers FREE
NEW QUESTION 35
What is the Organizationally Unique Identifier (OUI) in the MAC address 00:C4:4F:23:AF:4A?
- A. 00:C4:4F
- B. 23:AF:4A
- C. 4F:23:AF:4A
- D. 00:C4:4F:23
Answer: A
NEW QUESTION 36
Which component translates data, signaling, and protocols to facilitate the data flow between the end device and the network?
- A. NIC
- B. Transceiver
- C. Switch
- D. Port
Answer: B
NEW QUESTION 37
What is the correct sequence of steps when a web browser accesses a web server?
Answer:
Explanation:
NEW QUESTION 38
Which flags are used in the TCP header to initiate and end TCP connections or sessions?
- A. Initiate = Finish (FIN)
End = Synchronize (SYN) - B. Initiate = Synchronize (SYN) End = Finish (FIN)
- C. Initiate = Acknowledge (ACK) End = Finish (FIN)
- D. Initiate = Acknowledge (ACK) End = Synchronize (SYN)
Answer: B
NEW QUESTION 39
Which Layer 1 device can be used to enlarge the area covered by a single LAN segment?
- A. NIC
- B. Switch
- C. Repeater
- D. Router
Answer: C
NEW QUESTION 40
A network administrator has a Dell EMC switch that has been configured with several VLANs. Each VLAN switch virtual interface (SVI) has an IP address assigned to it with each of them on different subnets. In addition, routing has been enabled on the switch.
Which action occurs when the switch receives a packet on one of its SVIs but the destination IP address of the packet does not match the IP address of that SVI?
- A. Switch checks its routing table and forwards the packet accordingly.
- B. Switch duplicates the packet and sends it to all interfaces.
- C. Switch drops the packet.
- D. Switch replies back to the source with an ICMP Reject packet.
Answer: A
NEW QUESTION 41
Which IEEE standard defines the Data Link Layer, Discovery protocol?
- A. 802.1W
- B. 802.1AX
- C. 802.1D
- D. 802.1AB
Answer: D
Explanation:
Reference:
http://www.ieee802.org/3/frame_study/0409/blatherwick_1_0409.pdf
NEW QUESTION 42
Which port type should be used for only VLAN-unaware devices?
- A. Hybrid port
- B. Access port
- C. Trunk port
- D. General port
Answer: A
NEW QUESTION 43
Which platforms are supported by the Dell EMC Networking OS (DNOS) 6?
- A. N1700 Series switch and N1500 Series switch
- B. N1500 Series switch and N2000 Series switch
- C. N3500 Series switch and N2000 Series switch
- D. N1700 Series switch and N3500 Series switch
Answer: B
Explanation:
Reference:
https://www.dell.com/en-us/work/shop/povw/networking-os6
NEW QUESTION 44
An Ethernet switch receives a frame from a directly connected host. The source MAC address of the frame is not present in the MAC address table for the switch. However, the destination address is present in the MAC address table.
What does the switch do with the frame?
- A. Flushes the destination MAC address and updates the MAC address table in the switch.
- B. Adds the source MAC address and port to the MAC address table and forwards the frame.
- C. Floods the frame to all ports except for the port the frame originated from to locate the source MAC address.
- D. Discards the frame on all ports and sends an error message back to the host.
Answer: B
NEW QUESTION 45
What accurately describes IPv6 addressing?
- A. IPv6 is used to converse IP addresses and utilize private addresses.
- B. IPv6 addresses are denoted by eight groups of four hexadecimal numbers.
- C. IPv6 uses 128 hexadecimal numbers instead of the 32 hexadecimal numbers used by IPv4.
- D. IPv6 uses broadcast addresses for neighbor discovery.
Answer: B
Explanation:
Reference:
https://en.wikipedia.org/wiki/IPv6_address#:~:text=An%20IPv6%20address%20is% 20represented,0000%3A8a2e%3A0370%3A7334\
NEW QUESTION 46
A network administrator wants to use a subnet that will only have two host addresses. Which subnet mask meets this requirement?
- A. 255.255.255.252
- B. 255.255.255.254
- C. 255.255.255.256
- D. 255.255.255.248
Answer: A
NEW QUESTION 47
Which Dell EMC Networking M-Series 10 GbE switch model supports a VLT?
- A. M6220
- B. M6348
- C. MXL
- D. M8024-K
Answer: C
Explanation:
Reference:
https://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/ PowerEdge_M_Series_Blades_IO_Guide.pdf
NEW QUESTION 48
Refer to the exhibit.
Switch A and Switch B are connected to each other. Both switches use interfaces Gi1/0/1 and Gi1/0/2.
Switch A has a Spanning Tree priority of 8192 and Switch B has the default priority. Which interface becomes the root port?
- A. Switch A Gi1/0/1
- B. Switch B Gi1/0/2
- C. Switch B Gi1/0/1
- D. Switch A Gi1/0/2
Answer: A
NEW QUESTION 49
Which route type is added to the routing table by a routing protocol?
- A. Default route
- B. Directly connected
- C. Static
- D. Dynamic
Answer: D
NEW QUESTION 50
Which platforms are supported by the Dell EMC Networking OS (DNOS) 6?
- A. N1700 Series switch and N1500 Series switch
- B. N1500 Series switch and N2000 Series switch
- C. N3500 Series switch and N2000 Series switch
- D. N1700 Series switch and N3500 Series switch
Answer: B
Explanation:
Explanation/Reference: https://www.dell.com/en-us/work/shop/povw/networking-os6
NEW QUESTION 51
Which option is used to configure Network Address Translation (NAT) to provide one-to-one mapping between local and global addresses?
- A. Outside source static
- B. PAT
- C. Overload
- D. Inside source static
Answer: D
NEW QUESTION 52
Which IP address is in the Class B range?
- A. 100.100.90.87
- B. 192.15.48.130
- C. 126.16.20.48
- D. 191.56.44.200
Answer: D
NEW QUESTION 53
How many total addresses for network, broadcast, and host are provided with the subnet mask 255.255.255.240?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 54
How is a switch different from a hub?
- A. A switch decreases the number of broadcast storms.
- B. A switch operates at a lower, more efficient layer of the OSI model.
- C. A switch does not include any latency into the frame transfer time.
- D. A switch tracks MAC addresses of all connected devices.
Answer: D
NEW QUESTION 55
A network administrator is troubleshooting an OSPF routing issue. There are two paths to a destination network from one switch. In addition, one path is comprised of four 1 Gb links. The other path is comprised of two 1 Gb and two 100 Mb links. The administrator ran several trace routes and notices that the packets are swapping back and forth between the two paths.
Which corrective action must be taken on the switch infrastructure to correct this issue?
- A. Break the paths into multiple OSPF areas.
- B. Change the reference speed used by OSPF in cost calculations on all switches within the path.
- C. Manually specify the OSPF Router ID on each switch within the path.
- D. Switch all routing protocols to RIPv2.
Answer: B
NEW QUESTION 56
......
Pass EMC DEA-5TT1 Exam Info and Free Practice Test: https://www.testkingpdf.com/DEA-5TT1-testking-pdf-torrent.html
New 2022 Latest Questions DEA-5TT1 Dumps - Use Updated EMC Exam: https://drive.google.com/open?id=1m_0DWoFo2Leel1_ctdIiwhIJtImGOFlw
