Latest 1z0-1056-23 exam dumps with real Oracle questions and answers
1z0-1056-23 Exam in First Attempt Guaranteed
NEW QUESTION # 13
Your organization is looking to adopt a flexible approach to control the creation of claims investigation when the lockbox files contain invalid positive remittance references. This feature helps manage lockbox files that encounter invalid transaction numbers for receipts with customer assignment.
When this option is enabled in the Manage Receivables System Options task, which process must be run in Scheduled Processes to process Lockbox Receipts with invalid transaction referenced?
- A. Process Receipts and Remittances through Lockbox
- B. Process Lockbox Receipts
- C. Process Receipts through Lockbox
- D. Process Lockbox Receipts and Remittance References
Answer: B
Explanation:
Explanation
This process is used to process lockbox receipts with invalid transaction references when you enable the Create Claims Investigation option in Receivables System Options. References: [How You Process Lockbox Receipts - Oracle]
NEW QUESTION # 14
The AutoAc counting rule for the Revenue account is defined as follows:
When entering a manual invoice, the revenue account code combination is incomplete with the Department segment left blank. Which are the three reasons for this?
- A. Revenue Reference Accounts were entered for all salespersons.
- B. Salesperson is not required on the transaction and is left blank.
- C. Transaction Type was defined as Overapplication set to Yes but Post to GL set to No.
- D. Revenue Reference Accounts for Salesperson were not defined for the Transaction Business Unit
- E. No Sales Credit salesperson has no reference accounts.
Answer: A,B,E
Explanation:
Explanation
These are the three reasons for the revenue account code combination being incomplete with the Department segment left blank. The salesperson is not required on the transaction and is left blank, so the system cannot derive the Department segment from the salesperson reference accounts. The revenue reference accounts were entered for all salespersons, so the system cannot use the default revenue account from the transaction type.
The no sales credit salesperson has no reference accounts, so the system cannot use the default revenue account from the no sales credit salesperson. Verified References: [How You Define AutoAccounting - Oracle]
NEW QUESTION # 15
You are an IT contractor for a client who wants to increase internal controls on bank accounts set up in the Cash Management application. According to their new policy, a Cash Manager s ability to add. review, or make changes to bank accounts must be regionalized and restricted by their org structure.
Which statement is true about the restrictions applied to the setup?
- A. Cash Managers can only create but not manage bank accounts for those legal entities to which they are given access.
- B. Cash Managers can create and manage bank accounts for only those business units to which they are given access.
- C. Cash Managers can create and manage bank accounts for only those legal entities to which they are given access.
- D. Cash Managers cannot create but only manage bank accounts for those legal entities to which they are given access.
Answer: C
Explanation:
Explanation
This is the true statement about the restrictions applied to the setup. Cash Managers can access bank accounts based on their legal entity access privileges. They can create and manage bank accounts for only those legal entities that they are authorized to access. Verified References: [How You Manage Bank Accounts - Oracle]
NEW QUESTION # 16
You are asked to amend subledger accounting and reporting to include origin and history of Receivable transactions.
Which three event attributes should be used?
- A. Transaction creation date
- B. Transaction number of amendments
- C. Transaction type of update
- D. Transaction last update date
- E. Transaction created by
Answer: B,C,D
Explanation:
Explanation
These are the three event attributes that can be used to identify the origin and history of Receivable transactions. They capture the information about the changes made to the transactions, such as the transaction number, the type of update (create, update, delete), and the date of the last update. Verified References: [How You Define Event Attributes - Oracle]
NEW QUESTION # 17
Manage Receipt Classes and Methods
Scenario
Supremo US Business unit needs to capture customer payments that will be reconciled in the Cash Management application. You need to define a receipt class and receipt method, and assign the appropriate bank account to meet this requirement.
Task:
Create Receipt Method. where:
* Name of the new receipt method is XXCheck (Replace XX with 03. which is your allocated User ID.)
* Receipt method must be effective as of January 1. 2023
Answer:
Explanation:
See the explanation below for solution.
Explanation
* Log in to Oracle Financials Cloud.
* Click on the Receipt Methods icon in the Receivables work area.
* Click on the Create button.
* In the Receipt Method window, enter the following information:
* Name: XXCheck (Replace XX with your allocated user ID.)
* Effective Date: January 1, 2023
* Receipt Class: XXReceipt Class (The receipt class that you created in the previous step.)
* Bank Account: The bank account that will be used to clear receipts for this receipt method.
* Click on the Save button.
The new receipt method will be created.
NEW QUESTION # 18
When entering the Customer import upload spreadsheet, which two columns, if populated with *NULL will remove the existing values on loading?
- A. Credit Limit
- B. Credit Review Cycle
- C. First Review Date
- D. Order line Credit Limit
Answer: B,C
Explanation:
Explanation
These are the two columns that, if populated with *NULL, will remove the existing values on loading. They are part of the customer profile class attributes that can be updated using customer import. Verified References: [How You Manage Customer Data Uploads - Oracle]
NEW QUESTION # 19
Your customer receives their invoices via the XML delivery method. They want to receive billing transactions for specific sites only. Now you have been tasked with creating a very focused delivery method of XML transactions for this customer site that should be receiving the invoice.
To define this setup, you must add a new lookup code to the AR Features lookup type in the Manage Receivables Lookups task. Which lookup code would you use?
- A. AR_XML_INVOICE_ENHANCED
- B. AR_CUSTOMER.DELIVERY
- C. AR.INVOICE.XML.ENHANCED
- D. AR_NTERFACE.XML
- E. AR_XML.DELIVERY.METHOD
Answer: E
Explanation:
Explanation
This lookup code is used to define the XML delivery method for a customer site. You can specify the XML delivery method in the customer profile or in the transaction source. Verified References: [Overview of Oracle Receivables - Oracle]
NEW QUESTION # 20
In Collections, strategies can be executed based on the wait times defined on a strategy task. When the feature is enabled, you can also assign wait times for strategies based on their transaction type. Which condition must be set for the transaction level when defining a new strategy task by transaction type?
- A. Not Applicable
- B. DaysLate
- C. Time
- D. Days Early
Answer: B
Explanation:
Explanation
This is the condition that must be set for the transaction level when defining a new strategy task by transaction type. DaysLate is the number of days that a transaction is past due. You can use this condition to execute strategies based on how overdue a transaction is. Verified References: [How You Define Strategy Tasks by Transaction Type - Oracle]
NEW QUESTION # 21
After creating Receivables Activities using the General Ledger Rapid Implementation workbook upload process a Receivables Manager wants to review and make changes if required, to the account assignments created for these Receivables Activities.
Which two Receivables Activities DO NOT have account assignments to review and change?
- A. Debit Memo Reversal
- B. Miscellaneous Receipt
- C. Earned Discounts
- D. Unearned Discounts
- E. Adjustment Activities
Answer: C,D
Explanation:
Explanation
These two receivables activities do not have account assignments to review and change because they are not posted to general ledger. They are used to calculate discount amounts for transactions and receipts. Verified References: [How You Define Receivables Activities - Oracle]
NEW QUESTION # 22
Manage Balance Forward Billing Cycles and Payment Terms
Scenario
You are a consultant for a client who is implementing the Balance Forward Billing feature in Oracle Financials Cloud. You have been asked to define Balance Forward Billing Cycle as well as Balance Forward Billing Payment Terms so that your client can generate consolidated bills.
Task:
Define Balance Forward Payment Terms, where:
* Name of the payment term is XXNet 30 (Replace XX with 03, which is your allocated user ID.)
* Payment terms are accessible to all business units
* Discounts are applicable to the full invoice amount
* Discounts are applicable even when the customer does not send a full payment
* Payment terms are effective as of January 1. 2023
Answer:
Explanation:
See the explanation below for solution.
Explanation
* Log in to Oracle Financials Cloud.
* Click on the Payment Terms icon in the Receivables work area.
* Click on the Create button.
* In the Payment Terms window, enter the following information:
* Name: XXNet 30 (Replace XX with your allocated user ID.)
* Description: Net 30 payment terms
* Billing Cycle: All Cycles
* Due Date: Next Business Day
* Discount Days: 30
* Discount Amount: 2%
* Discount Type: Percentage
* Discount Allowed: Yes
* Discount Allowed Even If Partial Payment: Yes
* Effective Date: January 1, 2023
* Click on the Save button.
The new balance forward payment terms will be created.
To make the payment terms accessible to all business units:
* Click on the Business Units tab.
* Select the check box next to All Business Units.
* Click on the Save button.
The payment terms will now be accessible to all business units.
NEW QUESTION # 23
Manage Aging Methods
Scenario
Your organization needs to create their own a-bucket aging method for reporting purposes.
Task
Create a new 4-bucket Aging Method in the Collections application, where:
* Name Of the aging method is XXAging Method (Replace XX with 03, which is your allocated User ID.)
* Aging method is accessible to all business units
* Aging buckets are 45 days apart
* Last bucket is 91 days
Answer:
Explanation:
See the explanation below for solution.
Explanation
* Log in to Oracle Financials Cloud.
* Click on the Aging Methods icon in the Receivables work area.
* Click on the Create button.
* In the Aging Method window, enter the following information:
* Name: XXAging Method (Replace XX with your allocated user ID.)
* Description: Custom aging method for reporting purposes.
* Aging Buckets:
* 1: 0 to 45 days
* 2: 46 to 90 days
* 3: 91 to 135 days
* 4: 136 to 180 days
* Last Bucket: 181 days
* Available to All Business Units: Yes
* Click on the Save button.
The new aging method will be created.
NEW QUESTION # 24
Manage Balance Forward Billing Cycles and Payment Terms
Scenario
You are a consultant for a client who is implementing the Balance Forward Billing feature in Oracle Financials Cloud. You have been asked to define Balance Forward Billing Cycle as well as Balance Forward Billing Payment Terms so that your client can generate consolidated bills.
Task:
Create Balance Forward Billing Cycle, where:
* Name of the cycle is XXCycle (Replace XX with 03. which is your allocated user ID.)
* Bills are generated every day
* Cycle is effective as Of January 1,2023
Answer:
Explanation:
See the explanation below for solution.
Explanation
* Log in to Oracle Financials Cloud.
* Click on the Balance Forward Billing icon in the Receivables work area.
* Click on the Cycles tab.
* Click on the Create button.
* In the Balance Forward Billing Cycle window, enter the following information:
* Name: XXCycle (Replace XX with your allocated user ID.)
* Billing Frequency: Daily
* Effective Date: January 1, 2023
* Click on the Save button.
The new balance forward billing cycle will be created.
To create a Balance Forward Billing Payment Term:
* Click on the Payment Terms tab.
* Click on the Create button.
* In the Balance Forward Billing Payment Term window, enter the following information:
* Name: XXPaymentTerm (Replace XX with your allocated user ID.)
* Billing Cycle: XXCycle (The cycle that you created in the previous step.)
* Due Date: Next Business Day
* Overdue Days: 30
* Click on the Save button.
The new balance forward billing payment term will be created.
NEW QUESTION # 25
Manage Receipt Classes and Methods
Scenario
Supremo US Business unit needs to capture customer payments that will be reconciled in the Cash Management application. You need to define a receipt class and receipt method, and assign the appropriate bank account to meet this requirement.
Task:
Define Remittance Bank Account where:
* Bank Account is associated with Receipt Method
* Primary bank account is linked the Denver branch of Bank of America
* Bank account number ends with 2870
* Remittance bank account is effective as of January 1, 2023
* GL Accounts section must contain the values below for company segment 120 Supremo Fitness
Answer:
Explanation:
See the explanation below for solution.
Explanation
* Log in to Oracle Financials Cloud.
* Click on the Remittance Bank Accounts icon in the Receivables work area.
* Click on the Create button.
* In the Remittance Bank Account window, enter the following information:
* Name: XXRemittance Bank Account (Replace XX with your allocated user ID.)
* Bank Account Number: The bank account number that you want to associate with the receipt method.
* Bank Name: Bank of America
* Branch Name: Denver
* Account Type: Checking
* Effective Date: January 1, 2023
* Primary: Yes
* GL Accounts:
* Company Segment: 120 Supremo Fitness
* Account Code: 12000
* Account Name: Accounts Receivable - Supremo Fitness
* Company Segment: 120 Supremo Fitness
* Account Code: 12001
* Account Name: Allowance for Doubtful Accounts - Supremo Fitness
* Click on the Save button.
The new remittance bank account will be created.
NEW QUESTION # 26
Manage Collectors
Scenario:
You are responsible for defining a new collector. who will perform collection activities across multiple business units.
Task:
Create a new Collector. where:
* Name of the collector is (Replace XX with 03. which is your allocated User ID.)
* Collector must be available to all business units.
* Collector maps to employee FASXX Student (Replace xx with 03, which is your allocated User ID.)
Answer:
Explanation:
See the explanation below for solution.
Explanation
* Log in to Oracle Financials Cloud.
* Click on the Collectors icon in the Receivables work area.
* Click on the Create button.
* In the Collector window, enter the following information:
* Name: XXCollector (Replace XX with your allocated user ID.)
* Type: Employee
* Employee: FASXX03 (Replace xx with your allocated user ID.)
* Available to All Business Units: Yes
* Click on the Save button.
The new collector will be created.
NEW QUESTION # 27
......
Oracle 1z0-1056-23 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
Exam Sure Pass Oracle Certification with 1z0-1056-23 exam questions: https://www.testkingpdf.com/1z0-1056-23-testking-pdf-torrent.html
Download Real 1z0-1056-23 Exam Dumps for candidates. 100% Free Dump Files: https://drive.google.com/open?id=1udvFTO4D0J4UiaDpe6GDwOqCW1ztBtUo
