2025 TestkingPDF HP HPE0-S59 Dumps and Exam Test Engine
HP HPE0-S59 DUMPS WITH REAL EXAM QUESTIONS
NEW QUESTION # 18
Your customer plans to deploy VMware ESXi 7 0 U2 and they are looking for a hardware platform mat wilt allow them to use up to 24 TB of physical memory.
Which HPE compute system meets this customer's requirements?
- A. HPE Superdome Flex 280
- B. HPE ProLiant DL560 Gen10
- C. HPE ProLiant DL380 Gen 10 Plus
- D. HPE Synergy 480 Gen10 Plus
Answer: A
Explanation:
The HPE Superdome Flex 280 is the appropriate hardware platform for a customer requiring up to 24 TB of physical memory. This system is designed for high scalability and performance, supporting large memory configurations suitable for demanding applications and workloads.
NEW QUESTION # 19
Click the area within the iLO management interface that will allow you to access workload Advisor.
Answer:
Explanation:
NEW QUESTION # 20
Your customer needs to move an application from an HPE Synergy 480 Gen10 Compute Module to an HPE Synergy 660 Gen 10 Compute Module. The 480 has a switch that has been manually zoned outside of HPE OneView.
What must the customer do before migrating the application?
- A. Copy the server profile and assign the clone to the new hardware
- B. Migrate the application to a Logical JBOD and connect it to the new server
- C. Edit the server profile and change server hardware type
- D. Create a new server profile template and apply to the new hardware
Answer: C
NEW QUESTION # 21
Refer to the exhibit.
Which statement about this logical JBOD is true?
- A. This logical JBOD can be presented to the compute nodes in a different frame.
- B. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
- C. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
- D. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
Answer: A
Explanation:
In HPE Synergy, logical JBODs (Just a Bunch of Disks) can be configured to be accessible by compute nodes across different frames. This flexibility allows for the logical JBOD to be presented to compute nodes that are not in the same frame as the storage module, facilitating better resource utilization and workload management.
NEW QUESTION # 22
Drag and Drop Question
Put the steps of the HPE infosight flow in the correct order.
Answer:
Explanation:
NEW QUESTION # 23
Your customer plans to deploy VMware vSAN using D3940 Storage Modules.
Which statement about this solution is true?
- A. For VMware vSAN deployment, all drives in the D3940 storage modules must be SSD drives.
- B. The 12Gb SAS modules required for D3940 connectivity can only be installed in the first fabric.
- C. To use the storage controller that will access D3940 storage modules, a second CPU must be installed.
- D. All drives in the D3940 storage modules must formulate a single logical drive with RAID5 configured
Answer: A
Explanation:
For VMware vSAN deployments, it is recommended that all drives in the D3940 storage modules be SSD drives to ensure optimal performance and efficiency. SSDs provide the necessary speed and reliability required by vSAN for handling storage-intensive operations and maintaining high performance.
NEW QUESTION # 24
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. An additional license is required to change the enclosure count
- B. interconnect modules are installed in interconnect bays 1 and 4
- C. Both modules are located in different frames for redundancy
- D. For an uplink set, ports from different modules can be selected
Answer: B
Explanation:
In the HPE Synergy setup shown in the exhibit, the interconnect type is Virtual Connect SE 32Gb FC Module for Synergy with an enclosure count of 1 and interconnect bay set 1. Typically, in such configurations, the interconnect modules are installed in bays 1 and 4 for redundancy. This placement ensures high availability and failover capabilities.
NEW QUESTION # 25
Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).
What should you check during troubleshooting process?
- A. If an compute nodes are added to the vCenter Server
- B. If vCenter Server is licensed in the HPE Oneview interface
- C. If HPE OneView credentials are added in vCenter Server
- D. If the HPE Oneview instance Is integrated with HPE OV4VC.
Answer: D
Explanation:
When troubleshooting the deployment of HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC), it's essential to verify that HPE OneView credentials are correctly added in the vCenter Server. Proper integration and authentication are necessary for HPE OV4VC to communicate and manage the compute nodes effectively.
NEW QUESTION # 26
Which statement about HPE OneView milestone releases is true?
- A. A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy
- B. A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.
- C. A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.
- D. A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems
Answer: A
NEW QUESTION # 27
How is the advanced configuration of HPE server solutions typically performed?
- A. Manually on each server
- B. Using default settings
- C. Through a third-party application
- D. Remotely via a management console
Answer: D
NEW QUESTION # 28
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. The master modules are located in the interconnect bays 2 and 5
- B. For the given downlink speed, the maximum number of frames is reached
- C. Both master modules are located in the same HPE Synergy frame
- D. To use interconnect bay set 3, all compute nodes must be half-height
Answer: D
Explanation:
In HPE Synergy configurations, when using interconnect bay set 3, it implies that the compute nodes should be half-height. This is because bay set 3 is typically utilized in configurationswhere half-height compute nodes are used to ensure proper alignment and connectivity within the Synergy frame.
NEW QUESTION # 29
Your customer manages an HPE Synergy platform using HPE OneView 5.6. To leverage new functionalities, the customer wants to update HPE OneView to version 61 Which statement about this update process is true?
- A. To update to 6,1, the customer has to first update to 6 0, which is a milestone edition.
- B. The customer must check the HPE Composer version, as 61 is supported only with HPE Composer2.
- C. Before updating to 6,1, customer should increase memory size on the HPE Composer.
- D. The customer can update directly to 6,1, but HPE OneView downtime will be longer.
Answer: A
Explanation:
When updating HPE OneView to version 6.1, it is necessary to first update to version 6.0, which is a milestone edition. Milestone editions include significant architectural changes and updates that are prerequisites for subsequent versions. This step ensures that the system is properly prepared and compatible with the new features and improvements introduced in version 6.1.
NEW QUESTION # 30
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol What must be done to complete this task?
- A. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
- B. Enter both modules into a maintenance mode, then enable FC connectivity through CLI
- C. Enable FC primary and secondary boot on the modules through the HPE OneView interface
- D. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
Answer: C
Explanation:
To use FC (Fibre Channel) as a storage access protocol with HPE Primera to boot HPE Synergy compute nodes, you must add FC upgrade licenses in HPE OneView. These licenses enable FC connectivity for the HPE Virtual Connect SE 100Gb F32 Modules, allowing the compute nodes to connect to the FC storage.
NEW QUESTION # 31
Your customer has a logical enclosure configured using a angle HPE Synergy frame with the following configuration:
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- two HPE Synergy Virtual Connect SE 32Gb FC Modules
- 12 HPE Synergy 480 Gen10 Plus compute nodes with appropriate
mezzanine cards
They plan to add a new HPE Synergy frame to an existing logical enclosure with the following configuration:
- two HPE Synergy Virtual Connect SE 32Gb FC Modules
- two HPE Synergy 20Gb interconnect Link Modules
- Eight HPE Synergy 480 Gen 10 Plus compute nodes with appropriate
mezzanine cards
Which statement about the planned configuration change is true?
- A. The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked
- B. The two HPE Synergy 20Gb interconnect Link Modules must be replace with the 50Gb option
- C. Four compute modules must be moved to the second frame to balance the configuration
- D. A license for an extended logical enclosure must be added to HPE OneView through GUI
Answer: A
Explanation:
When adding a new HPE Synergy frame to an existing logical enclosure, it is essential to stack the HPE Synergy Virtual Connect SE 32Gb FC Modules from both frames. Stacking these modules ensures consistent management and redundancy across the logical enclosure, providing seamless integration and optimal performance.
NEW QUESTION # 32
Refer to Exhibit:
Your customer plans to update the firmware for the logical interconnect shown.
Based on the information in the exhibit, which statement about network connectivity is true?
- A. It is possible to update this logical interconnect without network downtime if orchestrated method is used.
- B. Compute nodes will experience network downtime if the Force option is selected, as it will enforce parallel update.
- C. Only the manual orchestration method will allow a firmware upgrade without causing network downtime.
- D. Compute nodes will experience network downtime not longer than 1 minute regardless of the orchestration method.
Answer: A
NEW QUESTION # 33
Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter.
The customer wants to use them to manage HPE Synergy Gen10 compute modules, HPE ProLiant Gen10 servers, and an MSA array.
Which statement about compatibility of the existing environment with the planned software components is true?
- A. Not all of HPE Storage Integration Pack for VMware vCenter features are supported with MSA arrays.
- B. Both HPE Synergy Gen10 full-height compute modules plugins will require a license.
- C. HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers.
- D. HPE ProLiant Gen10 systems require HPE OneView for VMware vCenter server licenses for each node.
Answer: A
NEW QUESTION # 34
Which statement about HPE Superdome Flex 280 is true?
- A. it cannot be managed using HPE OneView.
- B. It can support up to two nPars with an external RMC.
- C. It must be equipped with at least 768 GB of memory.
- D. It supports 2 to 8 sockets in 2-socket increments.
Answer: B
Explanation:
The HPE Superdome Flex 280 is a highly scalable server that supports 2 to 8 sockets in 2-socket increments.
This allows for flexible scaling of compute resources based on the needs of the workload, providing a balance between performance and cost.
NEW QUESTION # 35
Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter. The customer wants to use them to manage HPE Synergy Gen10 compute modules. HPE ProLiant Gen 10 servers and an MSA array.
Which statement about compatibility of the existing environment with the planned software components is true?
- A. To use the required plugins HPE ProLiant Gen10 systems must be managed using HPE OneView
- B. HPE Storage integration Pack for VMware vCenter does not support MSA arrays
- C. HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers
- D. Both HPE Synergy Gen10 full-height compute module plugins will require a license
Answer: C
NEW QUESTION # 36
You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures.
What will be the impact of that change?
- A. All logical interconnects configured using this logical Interconnect group will report inconsistency
- B. All physical interconnects from affected logical interconnects will be placed in a maintenance mode
- C. All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration
- D. All logical interconnects configured using this logical interconnect group will be automatically updated
Answer: A
Explanation:
When a logical interconnect group (LIG) that is used to configure logical interconnects in multiple logical enclosures is modified, all logical interconnects configured using this LIG will report inconsistency. This is because the configuration of the logical interconnects will no longer match the new settings defined in the modified LIG, and the inconsistencies must be resolved to ensure the configurations are synchronized.
NEW QUESTION # 37
Match HPE SimpliVity team with the definition.
Answer:
Explanation:
Explanation:
Here are the correct matches for each HPE SimpliVity term with their respective definitions:
* ArbiterDefinition:Facilitates communication between nodes and resolves state conflicts to ensure service continuity.
* Compute nodeDefinition:Non-hyperconverged servers that can exist in an HPE SimpliVity environment and provide additional compute capacity while consuming the storage provided by the hyperconverged nodes.
* Intelligent Workload OptimizerDefinition:Integrates with VMware Distributed Resources Scheduler to ensure optimal placement of the VM compute resources.
* Management Virtual ControllerDefinition:Provides centralized management and events end-point for vCenter.
* Arbiter:The Arbiter in an HPE SimpliVity environment is responsible for ensuring communication between nodes and resolving any state conflicts, which is crucial for maintaining service continuity.
* Compute node:In an HPE SimpliVity environment, a compute node refers to non-hyperconverged servers that provide additional compute capacity while utilizing the storage from hyperconverged nodes.
* Intelligent Workload Optimizer:This component integrates with VMware's Distributed Resources Scheduler (DRS) to optimize the placement of virtual machine (VM) compute resources, ensuring they
* are efficiently distributed across the environment.
* Management Virtual Controller:This controller provides centralized management and serves as the events end-point for vCenter, allowing for streamlined management and monitoring of the SimpliVity environment.
NEW QUESTION # 38
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has the appropriate storage controller installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that the compute nodes cannot access the storage module.
What will you verify first when troubleshooting this problem?
- A. If the SAS logical interconnect is a part of the logical enclosure and has a healthy state.
- B. If there is at least one iSCSI network configured that will provide access to the module.
- C. If the D3940 storage module is properly licensed through the HPE OneView interface.
- D. If the D3940 module is imported in a managed state that allows volume provisioning.
Answer: A
NEW QUESTION # 39
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.
Answer:
Explanation:
Explanation:
To check the Core Analysis Engine (CAE) Log on the HPE Superdome Flex 280, navigate to theLogssection in the management interface. This section provides access to various logs, including system, security, and diagnostic logs, which encompass the CAE logs necessary for detailed analysis and troubleshooting.
NEW QUESTION # 40
......
2025 New TestkingPDF HPE0-S59 PDF Recently Updated Questions: https://www.testkingpdf.com/HPE0-S59-testking-pdf-torrent.html
HPE0-S59 Exam with Guarantee Updated 113 Questions: https://drive.google.com/open?id=1zdsz-Uz1DDmm1XYYMIEtaFkWapaLhzOx
