[2025] Free C_THINK1_02 Exam Dumps to Pass Exam Easily
C_THINK1_02 Exam Dumps, C_THINK1_02 Practice Test Questions
SAP C_THINK1_02 exam assesses the candidate's ability to apply design thinking principles and methods in real-world scenarios. C_THINK1_02 exam covers various topics related to design thinking, such as empathy, problem-solving, prototyping, and iterative testing. C_THINK1_02 exam is available in multiple languages and can be taken online or in-person at a designated testing center.
NEW QUESTION # 14
The environment must facilitate collaboration and encouragerisk taking with a 'fail early & fail of tern' mentality.
Note: There are 1 correct answers to this question.
- A. Client
- B. Place
- C. Process
- D. People
Answer: B
NEW QUESTION # 15
What areas does the Design Thinking process iteratively integrate to find the right space for innovation?
Note: There are 3 correct Answers to this question.
- A. Viability
- B. Desirability
- C. Feasibility
- D. Accountability
- E. Predictability
Answer: A,B,C
NEW QUESTION # 16
Where is the ideation phase located in the Design Thinking process? Note: There is 1 correct answers to this question.
- A. Between research and synthesis.
- B. Between synthesis and prototyping
- C. Between prototyping and validation
- D. Between scoping and synthesis
Answer: B
Explanation:
The ideation phase is a pivotal stage in the Design Thinking process where teams generate a wide range of ideas to address the insights uncovered during synthesis. It bridges the gap between understanding the problem and creating tangible solutions.
* Option A: Between research and synthesis.This is incorrect. Ideation occurs after synthesis, not between research and synthesis. Synthesis involves analyzing data to identify patterns and insights, which then inform the ideation process.
* Option B: Between synthesis and prototypingThis is correct. Ideation follows synthesis, where teams brainstorm potential solutions based on the insights gained. These ideas are then translated into prototypes during the prototyping phase.
* Option C: Between scoping and synthesisThis is incorrect. Scoping defines the problem space, and synthesis analyzes the data collected during research. Ideation comes after synthesis.
* Option D: Between prototyping and validationThis is incorrect. Ideation precedes prototyping, where ideas are generated before being tested through prototypes.
NEW QUESTION # 17
You are in the phase when you capture interview results. What are the goals of a "structured wall of data"? Note: There are 2 correct Answers to this question.
- A. To identify common topics and understand the meaning of interview results
- B. To identify interview results that lie outside of the problem space
- C. To frame the potential solution space of the challenge
- D. To crystallize key user types, needs, and insights from interview stories
Answer: A,D
NEW QUESTION # 18
The concept of design thinking aligns with many of the facets of:
The Practice of Entrepreneurship (it incorporates the core elements of the practice and the essential skills of play, empathy, reflection, creation, and experimentation)
- A. False
- B. True
Answer: B
NEW QUESTION # 19
Why is time boxing important for coaching Design Thinking workshops? Note: There are 2 correct answers to this question.
- A. It keeps the number of ideas at a reasonable level.
- B. It is pivotal to ensure results are achieved
- C. It drives creativity
- D. It establishes the authority of the coach
Answer: B,C
Explanation:
Time boxing is a critical technique in Design Thinking workshops, as it helps maintain focus, manage time effectively, and foster creativity. Here's why the correct answers are B and D:
* Why this is incorrect:While time boxing may help the coach manage the workshop effectively, its primary purpose is not to establish authority. The role of the coach is to facilitate collaboration and guide the team, not to assert dominance.
NEW QUESTION # 20
When preparing for the workshop, the coach needs to run an interview with the workshop host. What topics does the coach need to clarify? Note: There are 3 correct Answers to this question.
- A. Workshop challenge
- B. Design Thinking techniques for synthesis
- C. Dress code
- D. Number, role, and background of participants
- E. U-shaped seating and table arrangement
Answer: A,B,D
NEW QUESTION # 21
What is a characteristic of an insight? Note: There is 1 correct answer to this question.
- A. The understanding of tasks and process steps described by users
- B. The understanding of the user's key needs.
- C. The understanding of the pain point a user has
- D. The understanding of the true nature of something
Answer: D
Explanation:
An insight in Design Thinking refers to a profound understanding derived from analyzing observations and data gathered during the Empathy phase. Insights go beyond surface-level observations to reveal underlying truths about user behaviors, motivations, and needs.
* Option A: The understanding of tasks and process steps described by usersWhile understanding tasks and process steps is important, it represents surface-level information rather than an insight. Insights delve deeper into why users perform certain actions or experience specific challenges.
* Option B: The understanding of the pain point a user hasIdentifying pain points is part of the Empathy phase, but it is not the full definition of an insight. An insight explains the root cause behind the pain point, offering a deeper understanding.
* Option C: The understanding of the user's key needsUnderstanding user needs is foundational, but an insight provides a more nuanced perspective that connects needs to broader patterns or underlying motivations.
* Option D: The understanding of the true nature of somethingThis is the correct answer because an insight captures the essence of what has been observed, revealing the "why" behind user behaviors or challenges. Insights are transformative and often lead to innovative solutions by uncovering hidden truths.
NEW QUESTION # 22
What is the correct sequence of phases for the Design Thinking process?
- A. Scoping - Research - Synthesis
- B. Ideation - Synthesis - Prototyping
- C. Preparation - Research - Scoping
- D. Research - Scoping - Ideation
Answer: A
NEW QUESTION # 23
What activities do you perform in the Synthesis phase? Note: There are 3 correct Answers to this question.
- A. Establish a "convergent" state of mind
- B. Derive insights
- C. Share raw data
- D. Generate ideas
- E. Establish a "divergent" state of mind
Answer: B,C,E
NEW QUESTION # 24
What are four questions that are useful to ask during the ciesignthinking process? (another variation to the design thinkingprocess) Note: There are 4 correct answers to this question.
- A. What works?
- B. What wows?
- C. What is?
- D. What if?
- E. What are?
Answer: A,B,C,D
NEW QUESTION # 25
Designers actively__________________people in their own environment to identify their real needs.
Note: There are 1 correct answers to this question.
- A. Blue Ocean REICC
- B. Observe
- C. Persona
- D. Multiplication
Answer: B
NEW QUESTION # 26
When preparing for the workshop, the coach needs to run an interview with the workshop host. What topics does the coach need to clarify? Note: There are 3 correct answers to this question.
- A. Number, role and background of participants
- B. Workshop challenge
- C. Design Thinking techniques for synthesis
- D. Dress code.
- E. U-shaped seating and table arrangement
Answer: A,B,D
NEW QUESTION # 27
One of the most common interviewing mistakes.
Note: There are 1 correct answers to this question.
- A. In the comments section
- B. In the data section
- C. In the header section
- D. Seeking validation for your ideas
Answer: D
NEW QUESTION # 28
What gets you to the root of the problem and builds optimism for both problem finding and problem solving?
Note: There are 1 correctanswers to this question.
- A. Process
- B. Place
- C. Client
- D. People
Answer: A
NEW QUESTION # 29
What is a key component of a low-fidelity mock-up that is built to prototype a software solution?
- A. Key functionality and simple screen flow
- B. Creation of backlog for later programming
- C. Book of final UI screenshots
- D. Wire frames demonstrating the screen layout and field sizes
Answer: A
NEW QUESTION # 30
A software company likes to use the User Story Mapping method in conjunction with Design Thinking. For which purpose would yourecommend using User Story Mapping?
Please choose the correct answer. Note: There are 1 correct answers to this question.
- A. To get a common understanding of the challenge/problem space
- B. To define the implementation backlog items
- C. To check on feasibility, viability and desirability
- D. To find data that serves to inspire the team and gain empathy
Answer: B
NEW QUESTION # 31
Which of the following are basic principles of field research? Note: There are 2 correct Answers to this question.
- A. What people say is often not what they do, think, or feel.
- B. Focus on the users who represent your main customer group.
- C. Ask a lot of "why" questions to get valuable data.
- D. Take people out of their context and put them in an inspiring environment.
Answer: A,C
NEW QUESTION # 32
What core components do you need to tackle a problem using Design Thinking? Note: There are 3 correct answers to this question.
- A. Multidisciplinary team of people.
- B. Highly iterative process
- C. Top management support
- D. Environment and materials
- E. Creativity
Answer: A,B,D
NEW QUESTION # 33
Are insights and observations the same thing?
- A. YES
- B. NO
Answer: A
NEW QUESTION # 34
Which techniques are typically used in Design Thinking workshops? Note: There are 2 correct answers to this question.
- A. Six Sigma
- B. Lean management
- C. Point of view
- D. Low-fidelity (lo-fi) prototyping
Answer: C,D
Explanation:
SAP Design Thinking workshops utilize specific techniques to facilitate creativity, collaboration, and problem-solving. Here's why the correct answers are A and C:
* Low-fidelity (lo-fi) prototyping (A):Lo-fi prototyping is a fundamental technique in SAP Design Thinking. It involves creating simple, inexpensive prototypes to test ideas quickly and gather feedback.
These prototypes can take the form of sketches, wireframes, or physical models. SAP emphasizes lo-fi prototyping as a way to iterate rapidly and refine solutions based on user input.
* Point of view (C):Developing a point of view (POV) is a critical step in SAP Design Thinking. A POV articulates the problem statement from the user's perspective, combining insights from empathy research with the team's understanding of the challenge. It serves as a guiding statement for ideation and solution development. SAP highlights the importance of a well-defined POV to ensure alignment with user needs.
Incorrect Options:
* B. Six Sigma:Six Sigma is a process improvement methodology focused on reducing variability and defects. It is not typically used in Design Thinking workshops, which prioritize creativity and user- centered innovation.
* D. Lean management:While lean management shares some principles with Design Thinking, such as efficiency and continuous improvement, it is not a technique specifically used in SAP Design Thinking workshops.
NEW QUESTION # 35
......
SAP C_THINK1_02 exam covers a range of topics related to design thinking, including empathy, ideation, prototyping, and testing. It also covers the various tools and techniques used in the design thinking process, such as user interviews, brainstorming sessions, and rapid prototyping. C_THINK1_02 exam is designed to test the candidate's ability to apply these methodologies and tools to real-world business problems.
C_THINK1_02 Exam Dumps, C_THINK1_02 Practice Test Questions: https://www.testkingpdf.com/C_THINK1_02-testking-pdf-torrent.html
Free C_THINK1_02 Study Guides Exam Questions and Answer: https://drive.google.com/open?id=1DYoncHsojqAoBOL06VZNaLBlH1ab5I6Q
