2024 350-801 Dumps PDF - 350-801 Real Exam Questions Answers
Valid 350-801 Test Answers & Cisco 350-801 Exam PDF
How to Prepare for Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)
Preparation Guide for Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)
Introduction for Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)
Implementing Cisco Collaboration Core Technologies v1.0 (CLCOR 350-801) is a 120-minute exam associated with the CCNP and CCIE Collaboration Certifications. This exam tests a candidate's knowledge of implementing core collaboration technologies including infrastructure and design, protocols, codecs, and endpoints, Cisco IOS XE gateway and media resources, Call Control, QoS, and collaboration applications. Practice with CISCO 350-801 practice exam and CISCO 350-801 practice exams can help you with passing the exam easily.
You should be familiar with:
- Basics of digital interfaces, Public Switched Telephone Networks (PSTNs), and Voice over IP (VoIP)
- Fundamental knowledge of converged voice and data networks and Cisco Unified Communications Manager deployment
- Working knowledge of fundamental terms of computer networking, including LANs, WANs, switching, and routing
NEW QUESTION # 225
Which configuration tells a switch port to send Cisco Discovery protocol packets that configure an attached Cisco IP phone to trust tagged traffic that is received from a device that is connected to the access port on the Cisco IP phone?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option A
- D. Option B
Answer: D
Explanation:
Explanation
NEW QUESTION # 226
An administrator configures the voicemail feature in a Cisco collaboration deployment. The user mailboxes must be configured when the Cisco Unity Connection server is configured. Which action accomplishes this task?
- A. Configure an AXL server to access the Cisco UCM users.
- B. Configure a SIP integration with Cisco UCM to sync users.
- C. Configure an active directory to sync the users who will have a voicemail box.
- D. Configure an SCCP integration with Cisco UCM.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/rel3_1/administration/guide/voic email/3VMpara.html
NEW QUESTION # 227
A customer reports that the Cisco UCM toll-fraud prevention does not work correctly, and the customer is receiving charges for unapproved international calls as a result.
Which two configuration changes resolve the issues? (Choose two.)
- A. Disable call forwarding on the phone.
- B. Use Cisco Unified Border Element to debug the calls.
- C. Modify the Block OffNet to OffNet Transfer service parameter.
- D. Make the calls route through a firewall.
- E. Mark patterns as off-net or on-net.
Answer: C,E
Explanation:
We can classify the calls as offnet on route patterns and then enable the service parameter to block offnet to offnet calls.
NEW QUESTION # 228
A Cisco Unity Connection administrator receives a name change request from a voice-mail user, whose Cisco Unity Connection user account was imported from Cisco Unified Communications Manager. What should the administrator do to execute this change?
- A. Change the user data in the Cisco Unity Connection administration page, then use the Synch User page in Cisco Unity Connection administration to push the change to Cisco Unified Communications Manager.
- B. Change the user profile from Imported to Local on Cisco Unity Connection Administration, then edit the data locally on Cisco Unity Connection.
- C. Change the user data in the Cisco Unified Communications Manager administration page, then use the Synch User page in Cisco Unity Connection administration to pull the changes from Cisco Unified CM.
- D. Change the user data in Cisco Unity Connection and Cisco Unified Communications Manager separately.
- E. Change the user data in the Cisco Unified Communications Manager administration page, then use the Synch User page in Cisco Unified CM administration to push the change to Cisco Unity Connection.
Answer: C
Explanation:
As we can see user are getting synch from call manager so we first have to change the details of user on call manager so that user will synch the changes from call manager.
NEW QUESTION # 229
A collaboration engineer troubleshoots issues with a Cisco IP Phone 7800 Series The IPv4 address of the phone is reachable via ICMP and HTTP and the phone is registered to Cisco UCM However, the engineer cannot reach the CLI of the phone Which two actions in Cisco UCM resolve the issue? (Choose two)
- A. Enable FIPS Mode under Product Specific Configuration Layout in Cisco UCM
- B. Enable Settings Access under Product Specific Configuration Layout in Cisco UCM.
- C. Enable SSH Access under Product Specific Configuration Layout in Cisco UCM
- D. Set a username and password under Secure Shell Information in Cisco UCM
- E. Disable Web Access under Product Specific Configuration Layout in Cisco UCM
Answer: A,C
NEW QUESTION # 230
An administrator configures international calling on a Cisco UCM cluster and wants to minimize the number of route patterns that are needed.
Which route pattern enables the administrator to match variable-length numbers?
- A. 9.011#
- B. 9.011@
- C. 9.011!
- D. 9.011*
Answer: C
Explanation:
https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/3_1_2/ccmcfg/b03spchr.html
NEW QUESTION # 231
Which program is required to deploy the Cisco Jabbar client on an on-premises Cisco collaboration solution?
- A. Cisco Unity Connection
- B. Cisco Expressway-C
- C. Cisco UCM
- D. Cisco UCM IM and Presence
Answer: C
NEW QUESTION # 232
A Cisco IP Phone 7841 that is registered to a Cisco Unified Communications Manager with default configuration receives a call setup message. Which codec is negotiated when the SDP offer includes this line of text?
M=audio 498181 RTP/AVP 0 8 97
- A. G.711alaw
- B. G.711ulaw
- C. iLBC
- D. G.722
Answer: B
NEW QUESTION # 233
A user dials 9011841234567 to reach Vietnam. Which steps send the call to the PSTN provider as 011841234567?
A)
B)
C)
D)
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: B
NEW QUESTION # 234
A Cisco voice gateway is configured to use a sip-kpml DTMF relay in global settings. A new SIP dial peer is configured for a third-party application that only supports an in-band DTMF relay. Which commands must an engineer run on the dial peer?
- A. dtmf-relay sip-info
- B. no dtmf-relay sip-kpml
- C. dtmf-relay sip-notify
- D. dtmf-relay rtp-net
Answer: D
NEW QUESTION # 235
How does an administrator make Cisco IP phone display the lest 10 digits of the calling number when the call is in the connected state, and also display the calling number in the E.164 format within call history on the phone?
- A. Change the service parameter Apply Transformations On Remote Number to True.
- B. On the inbound SIP trunk, change Significant Digits to 10.
- C. Configure a translation pattern that has a calling Party Transform Mask of XXXXXXXXXX.
- D. Configure a calling party transformation pattern that keeps only last 10 digits.
Answer: A
NEW QUESTION # 236
An engineer must configure a cisco ISR 4000 as an MGCP gateway to download its MGCP-specific configuration from cisco UCM. Which Cisco IOS configuration snippet accomplishes this task?
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: D
NEW QUESTION # 237
What should be used to detect common issues on a Cisco IOS XE-based Local Gateway and generate an email?
- A. Real-Time Monitoring Tool
- B. SNMP
- C. syslog
- D. diagnostic signatures
Answer: D
Explanation:
Diagnostic signatures are a feature that proactively detects commonly observed issues in the IOS XE-based Local Gateway and generates email, syslog, or terminal message notification of the event12. You can also install the diagnostic signatures to automate diagnostics data collection and transfer collected data to the Cisco TAC case to accelerate resolution time12.
NEW QUESTION # 238
Where is the default for maximum session Bit Rate for a region configured?
- A. Enterprise parameters configuration
- B. Region configuration
- C. Service parameter configuration
- D. Enterprise Phone configuration
Answer: B
NEW QUESTION # 239
Refer to the exhibit.
https://i.postimg.cc/wMYy0Fhm/image.png
Drag and drop the flow step labels from the left into the correct order on the right to establish this call flow:
* User 1 calls user 2.
* User 2 answers the call
* user 2 disconnects the call
Answer:
Explanation:
NEW QUESTION # 240
Which two recommendations are made to optimize Cisco UCM configuration to reduce the number of toll fraud incidents in an organization? (Choose two.)
- A. Inbound CSS on any gateway typically should have access to internal destinations and PSTN destinations.
- B. Inbound CSS on any gateway typically should have access to internal destinations only and not PSTN destinations.
- C. Classify all route patterns as on-net and prohibit on-net to on-net call transfers in Cisco UCM service parameters.
- D. Classify all route patterns as off-net and prohibit off-net to off-net call transfers in Cisco UCM service parameters.
- E. Classify all route patterns as on-net or off-net and prohibit off-net to off-net call transfers in Cisco UCM service parameters.
Answer: B,E
NEW QUESTION # 241
User A Calls user. The call gets connected, but the quality is bed. What are two reasons for this issue? (Choose two)
- A. Network congestion
- B. Incompatible codec
- C. Incorrect QoS
- D. Incorrect partition
- E. No region relationship
Answer: A,C
NEW QUESTION # 242
Which two configuration elements are part of the Cisco UCM toll-fraud prevention?(Choose two.)
- A. feature control policy
- B. Calling Search Space
- C. partition
- D. SUBSCRIBE Calling Search Space
- E. SIP trunk security profile
Answer: A,B
Explanation:
The following are the configuration elements that are part of the Cisco UCM toll-fraud prevention:
Feature control policy - This policy controls the features that are available to users. For example, you can use this policy to prevent users from making international calls.
Calling Search Space - This space defines the numbers that users can call. For example, you can use this space to prevent users from calling premium-rate numbers.
NEW QUESTION # 243
An engineer with ID012345678 must build an international dial plan in Cisco Unified Communications Manager.
Which action should be taken when building a variable-length route pattern?
- A. set up all international route patterns to 0.!
- B. create a second route pattern followed by the # wildcard
- C. configure single route pattern for international calls
- D. reduce the T302 timer to less than 4 seconds
Answer: D
NEW QUESTION # 244
Refer to the Exhibit.
Which command is required to allow this media resource to handle Video Media streams?
- A. associate application Cisco unified border element
- B. codec pass-through
- C. video codec h264
- D. maximum sessions hardware 50
Answer: B
NEW QUESTION # 245
Due to service provider restriction, Cisco Unified Communications Manager cannot send video in the SDP. Which two options on Cisco Unified CM are configured to suppress video in the SDP is outgoing invites? (Choose two.)
- A. Add the audio forced command to voice service voip on the Unified Border Elements.
- B. Change the Video Capabilities dropdown on the endpoint to Disabled.
- C. Check the Send send-receive SDP in mid-call INVITE check box on the SIP trunk SIP profile.
- D. Set Video bandwidth in the Region settings to 0.
- E. Check the Retry Call as Audio on the SIP trunk
Answer: D,E
NEW QUESTION # 246
......
350-801 Exam Dumps - PDF Questions and Testing Engine: https://www.testkingpdf.com/350-801-testking-pdf-torrent.html
Realistic 350-801 Exam Dumps with Accurate & Updated Questions: https://drive.google.com/open?id=1elSuXIakSgDZme3iKA0s7tX2zI4CqagL
