2022 Latest 100% Exam Passing Ratio - AD0-C102 Dumps PDF
Pass Exam With Full Sureness - AD0-C102 Dumps with 62 Questions
NEW QUESTION 35
What is a convenient way to toggle Show Guides on and off when creating titles?
- A. In Window > Program Monitor, check Show Guides.
- B. Use the Button Editor to add the Show Guides button.
- C. In the Essential Graphics panel, check Show Guides.
- D. In the Timeline panel menu check Show Guides
Answer: B
NEW QUESTION 36
You are performing drag-and-drop editing using the Program monitor drop-zones.
What happens when you drop a video only dip onto the Replace Edit drop zone in the Program monitor, with no clips selected in the sequence?
- A. If there is content on the patched tracks at the playhead and an In or an Out point exists In the sequence, the clip replaces media In the sequence.
- B. The clip replaces media in the Timeline using an Overwrite edit, based on duration of In to Out points marked m the Source clip.
- C. If there is a video dip on the patched Hack at the playhead position, the new clip replaces it Otherwise, no edit is performed.
- D. The clip replaces media at The In point marked in the sequence using In point or media start from the Source clip.
Answer: C
NEW QUESTION 37
You have clips containing multiple matching camera angles stacked ina Sequence, but they are not correctly aligned. All clips contain matching reference audio, but the picture and sound are playing out of sync.
How can you realign these clips directly in the timeline?
- A. Select the group of clips that are out of alignment with one another in the Timeline, then go to the Sequence Menu and choose Synchronize. In the dialog box select Audio as the Synchronize Point and press ok.
- B. Select the group of clips that are out of alignment with one another in The Timeline, and from the Sequence tab drop down menu choose Multi-Camera Audio Follows Video.
- C. Select the group of clips that ate out of alignment with one another in the Timeline, right-E tick and choose Synchronize, in the dialog box choose Audio as the Synchronize Point and press ok.
- D. Choose Synchronize in the Timeline panel menu, then choose Audio as the Synchronize Point. From the Track Channel pull-down menu choose Channel 1 or Channel 2 and press ok.
Answer: C
NEW QUESTION 38
In a sequence, you have several clips with through-edits.
How can you configure Adobe Premiere Pro to highlight these edits?
- A. Right-dick any instance of the clip and select Show Through Edits.
- B. Select Edit > Preferences > Timeline and check Show Through Edits.
- C. Click Timeline Display Settings and choose Show Through Edits.
- D. Right-dick any edit point and select Show Through Edits.
Answer: C
NEW QUESTION 39
Your customer wants a video file with visible timecode. How can you do this using the Export Settings dialog box?
- A. Choose Effects > Timecode Overlay.
- B. Choose Captions > Timecode.
- C. Choose Add Timecode Bum-in,
- D. Choose Set Start Timecode.
Answer: B
NEW QUESTION 40
You have multiple voice dips o* varying levels in a sequence.
How can you quickly adjust all the clips to match a consistent level?
- A. Add the Multiband Compressor effect to all Hacks in (he Audio Track Mixer, and choose the Broadcast preset.
- B. Add the Loudness Radar effect to all tracks In the Audio Track Mixer, and choose the appropriate Broadcast preset for the specific region.
- C. Select an the clips and dick Clip > Audio Options > Audio Gain > Normalize Max Peak To and enter the peak amplitude level.
- D. Use the Essential Sound panel to tag dialogue clips as Dialogue and click the Loudness Auto-Match button.
Answer: D
NEW QUESTION 41
You shot an interview with two separate cameras, and you notice that the colors of the two cameras do not match. How can you view both clips at the same time to make a comparison?
- A. Choose Clip > Video Options > Match Frame.
- B. Choose Sequence > Reverse Match frame.
- C. Choose Comparison View in the Program Monitor panel.
- D. Choose Sequence > Color Comparison View.
Answer: B
NEW QUESTION 42
You have winged all the voice over clips in a sequence on a single track.
How can you conveniently adjust the audio level for the sequence voice over clips?
- A. Select all the clips, and adjust the rubber band for any clip that has been selected.
- B. In the Audio Clip Mixer, adjust the level for the track containing the voice over clips.
- C. In the Audio Track Mixer, adjust the level for the track containing the voice over dips.
- D. Select all the clips, right-dick any selected dip, and choose Audio > Set Level To.
Answer: B
NEW QUESTION 43
How can you make it easier toavoid accidentally overlapping existing frames from other clips as you move a dip in the Timeline panel?
- A. Preferences > Timeline, choose Snap In Timeline.
- B. Navigate to Clip and Check the Group option.
- C. Activate Snapping in the Timeline panel.
- D. Preferences > General, choose Group Clips.
Answer: D
NEW QUESTION 44
You are working on a project using the latest operating system and a certified supported video card.
How should Adobe Premiere Pro be configured to take advantage of the GPU processing power for faster rendering?
- A. Choose File > Project Settings > General. Under Renderer. choose Mercury Playback Engine Software Only.
- B. In Preferences > Media, check The box next to Mercury Playback Engine GPU Acceleration.
- C. Choose Sequence > Sequence Settings. Under Video Renderer choose Mercury Playback Engine GPU Acceleration.
- D. Choose File > Project Settings > General. Under Renderer. choose a Mercury Playback Engine GPU Acceleration option.
Answer: C
NEW QUESTION 45
You want to export captions as a separate Me and upload it to YouTube.
How can you do this?
- A. With the captions clip selected in the project panel click File > Export > Captions, and choose the SubRip Subtitle format
- B. With the captions clip selected in the timeline, click File > Export > SubRip Subtitle format.
- C. Right-click the captions clip in the timeline, click Captions > Export and choose the SubRip Subtitle format.
- D. In the Captions panel, click export > Open Captions, and choose the SubRip Subtitle format.
Answer: B
NEW QUESTION 46
You want to configure a preset to adjust the timing of keyframes to fit the duration of the target clip. In the Save Preset dialog, which option should you select?
- A. Length
- B. Proportional
- C. Scale
- D. Duration
Answer: A
NEW QUESTION 47
You have created a project that includes several elements you expect to use in future projects. What is the most efficient way to save time when creating similar projects?
- A. Select the clips and sequences you want to include. Choose File > Save As > Template Project.;
- B. Note the media elements you found most useful and keep a record of any important effects and settings.
- C. Save a full quality rendered output of every sequence so you can incorporate elements in future projects.
- D. Save a copy with (he media you expect to re-use in a single folder and use it as a template project
Answer: A
NEW QUESTION 48
The Media Cache Files in Premiere Pro are by default stored here:
* Mac Users: Macintosh HD/Users/UserName/Library/Application Support/Adobe/Common
* Windows Users: C:Users\UserName\ AppData\Roaming\Adobe\Common
Where can you change this location?
- A. Preferences > Media Cache > Media Cache Files
- B. Sequence > Sequence Settings > Media Cache Files
- C. Project Settings > Scratch Disks > Media Cache Files
- D. Project > Project Settings > Media Cache Files
Answer: B
NEW QUESTION 49
You are working using the list view in the Project panel and would like to sort clips by date when the original media was created. The needed column is not visible.
How can you make this column visible?
- A. Right-click on the column header and choose Metadata Display.
- B. Choose Window > Metadata.
- C. Choose Pile > Project Settings > Metadata.
- D. Choose Clip > Metadata Display.
Answer: C
NEW QUESTION 50
What happens if you drag one sequence into a new sequence with sequence nesting turned off in the Timeline panel?
- A. The original sequence appears in the new sequence as a multicamera source sequence.
- B. The original sequence will edit into the new sequence as a single clip.
- C. Individual clips in the original sequence will be edited into the new sequence.
- D. You will not be able to edit the original sequence into the new sequence.
Answer: B
NEW QUESTION 51
A graphic in the Source Monitor seems to have a black background and you are not sure if it has an Alpha channel.
How can you set The Source Monitor to display the graphic contents along with areas of Transparency rather than with a black background?
- A. Open the Source Monitor panel menu and choose Show Transparent Pixels.
- B. Right click the Source Monitor and choose Overlays > Alpha.
- C. Open the View menu and choose Display Mode > Alpha Channel.
- D. Open the Source Monitor Settings menu and choose Transparency Grid.
Answer: D
NEW QUESTION 52
You are editing in Mercury Playback Engine Software Only mode. You have used several effects that support
32-bit processing-How can you ensure. That the effects are rendered in 32-bit when exporting?
- A. Check Render Alpha Channel Only.
- B. Choose Performance > Hardware Encoding.
- C. Use Maximum Render Quality.
- D. Check Render at Maximum Depth.
Answer: C
NEW QUESTION 53
You have a large amount of clips with similar names in a bin. You are searching for a particular visual event.
Out you're not sure which clip or when the event occurs.
Using default settings, how can you quickly preview the contents of the clips without opening them in the Source Monitor?
- A. Set the bin to Icon view. Select the clip you would line to preview. Move the cursor across the dip thumbnails to see the contents.
- B. Set the bin to Icon view. Move the cursor across clip thumbnails without selecting them. The clip contents will be displayed.
- C. Select all the clips in the bin and drag them into the Media Browser panel. Use playback controls to preview their contents.
- D. Set the bin to Icon view. Mold Command (macOS) / Ctrl (Windows) while moving the cursor across clip thumbnails.
Answer: C
NEW QUESTION 54
You have edited a multicamera source sequence into a large! sequence. You want to view the footage from multiple cameras simultaneously. How do you enable Multi-Camera editing in the Program Monitor?
- A. Choose View > Program Monitor > Multi-Camera.
- B. Click the Program Monitor Settings icon and choose Multi-Camera.
- C. Select the Multi-Camera view button located on the Source Monitor Button Bar.
- D. Choose Multi-Camera view from the Program Monitor panel menu.
Answer: C
NEW QUESTION 55
You want to customize which columns show in the list view of the Project panel. How can you accomplish this?
- A. Choose Edit > Project Settings > Metadata.
- B. Right click a Bin and choose Metadata Display.
- C. In the Project panel menu, choose Metadata Display.
- D. In the Metadata panel choose Project Metadata.
Answer: B
NEW QUESTION 56
You want to create proxies in Premiere Pro- and the existing presets are not suitable for your media. How do you create a custom Ingest preset for Premiere Pro?
- A. Use File > Export > Ingest Preset to create a custom preset
- B. Use Adobe Media Encoder to create a custom preset for use in Premiere Pro.
- C. Use Premiere Pro Ingest settings to create a custom preset
- D. Use Preferences > General, check Save Export Presets as Ingest Presets.
Answer: C
NEW QUESTION 57
You have an edit point selected as Roll edit (red brackets and you would like to dim one frame left. What is the default shortcut to perform this operation?
- A. Alt (Windows! / Shift (macOS) + left arrow
- B. Control (Windows) / Command (macOS) + left bracket key
- C. Control (Windows) / Option (macOS) + left arrow
- D. Alt (Windows) / Option (macOS) + up arrow key
Answer: B
NEW QUESTION 58
......
Verified AD0-C102 dumps Q&As - 100% Pass from TestkingPDF: https://www.testkingpdf.com/AD0-C102-testking-pdf-torrent.html
