100% Pass Your C-TS414-2023 Exam Dumps at First Attempt with TestkingPDF
Penetration testers simulate C-TS414-2023 exam PDF
NEW QUESTION # 19
Which type of inspection point exist in the system.(3 correct ans)
- A. Inspection point for functional location
- B. Inspection point for incoming certificates
- C. Inspection point for defects recording
- D. Inspection point for equipment
- E. Inspection point for Physical sample
Answer: A,D,E
NEW QUESTION # 20
The sample-drawing procedure contains one or more sample-drawing items.Which information can be found in the sample-drawing item?Note: There are 2 correct answers to this question.
- A. Confirmation of sample drawing
- B. Sample categories
- C. Sample drawing based on number of containers
- D. Number of samples
Answer: B,D
NEW QUESTION # 21
Your customer requires the lab to use quantitate characteristics during a production result recording.
Which result confirmation control indicators are available for quantitative results
- A. Single value
- B. Mean value
- C. Summarized
- D. Class confirmation
- E. Tolerance keys
Answer: A,C,D
NEW QUESTION # 22
Your consumer wants to perform an inspection at the vender's site instead of performing one during goods receipt.....
Where must you change the settings in the system?
- A. Vendor master
- B. Purchase order
- C. Material master
- D. Quality info record in procurement
Answer: D
NEW QUESTION # 23
You create a supplier claim notification with reference to material document year, number and item from a goods receipt for the PO What information is copied to the notification?
Note : 3 correct answer
- A. Quantity and unit
- B. Purchasing document number and item
- C. Material number
- D. Advanced Shipping number
- E. Inspection lot number
Answer: A,B,C
NEW QUESTION # 24
During the creation of an inspection lot which quality management master data automatically trigger Physical sample documents?
- A. Sample Scheme
- B. Sample drawing procedure
- C. Dynamic Modification rule
- D. Sample procedure
Answer: B
NEW QUESTION # 25
Where do you define the procedure for calculation of the quality score at usage decision?
- A. Usage decision code
- B. Quality info record: Procurement
- C. Inspection type settings in the material master
- D. Procurement data in the quality management view of the material master
Answer: C
NEW QUESTION # 26
During results recording, you can create additional inspection characteristics for the inspection operation. Which characteristics can be used as additional inspection characteristics? Note: There are 2 correct answers to this question.
- A. Master inspection characteristics as incomplete copy model
- B. Master inspection characteristics as reference characteristic
- C. Master inspection characteristics as complete copy model!
- D. Class characteristics from the classification system
Answer: B,D
NEW QUESTION # 27
A buyer creates a purchase order for a material for which QM in procurement is active What does the system verify when a target QM system is assigned to the material master? Note : 3 Correct answer
- A. The QM quality info record
- B. The defined assignments for QM systems in the implementation Guide (IMG)
- C. "The vendor master
- D. The purchasing info record
- E. The inspection type
Answer: A,B,C
NEW QUESTION # 28
Which QM master data must you maintain to separate a sample into a primary and reserve sample?
- A. Sample drawing procedure
- B. Sample size
- C. Sample processes
- D. Sample determination
Answer: A
NEW QUESTION # 29
From which tables does quality management information system (QMIS) retrieve data?
- A. Control charts
- B. Info structure
- C. Early warning processes
- D. Structure figures
Answer: B
NEW QUESTION # 30
Which catalogue types require the use of selection sets? Correct 2
- A. Characteristic
- B. Usage decision
- C. Defect type
- D. Tasks
- E. Actions
Answer: A,B
NEW QUESTION # 31
When creating an operation step in an inspection plan , which of the following is mandatory?
- A. Work centre
- B. Control key
- C. Activity type
- D. Standard text
Answer: B
NEW QUESTION # 32
The quality inspector records defects in results recording for a material inspection. When creating notification the system determines the catalog profile by consulting objects in which of following sequences?
- A. report type - Notification Type - Material
- B. report type - Material - Notification Type
- C. Material - Notification Type - report type
- D. Notification Type - report type - Material
Answer: C
NEW QUESTION # 33
What must you do in configuration to enable defects recording during an inspection with inspection lots? Note : 2 correct answer
- A. Assign the notification type to the inspection type.
- B. Activate the work flow template
- C. Define the defect report type
- D. Activate reference to Existing notifications.
Answer: A,C
NEW QUESTION # 34
Which object type is not stored directly in the data set of a supplier claim notification?
- A. Material document
- B. Quotation
- C. Purchasing organization
- D. Purchasing document
Answer: B
NEW QUESTION # 35
You can assign objects to the item of a quality notification.Which of the following object categories are supported in the SAP S/4HANA standard system?Note: There are 3 correct answers to this question.
- A. Delivery item
- B. Batch
- C. Purchase order item
- D. Material
- E. Serial number
Answer: B,D,E
NEW QUESTION # 36
How does the system handle equipment and functional locations in an inspection lot in calibration inspection?
- A. As a characteristic
- B. As physical sample
- C. As a inspection point
- D. As a material
Answer: D
NEW QUESTION # 37
When you post a good receipt, where does the system check the current inspection stage for a material/vendor combination for upcoming inspection .
- A. Inspection Plan
- B. Characteristic
- C. Sampling scheme
- D. Quality level
Answer: D
NEW QUESTION # 38
Which inspection origin creates only unplanned physical samples?
- A. 2 goods issue
- B. 3 production
- C. 16 stability study
- D. 15 sample management
Answer: D
NEW QUESTION # 39
which copy model must user maintain in a Master inspection character to forbid changes in Inspection plan
- A. Inspection qualification
- B. Reference characteristics
- C. incomplete copy model
- D. Complete copy model
Answer: B
NEW QUESTION # 40
How many times can you execute the task step of an initial sample in a stability study?
- A. Twice
- B. Once
- C. An infinite number of times
- D. Three times
Answer: B
NEW QUESTION # 41
By integrating the QM component in the production process, you can monitor and document process capability and the quality of products.
Which statistical and graphical tools does SAP provide to monitor a process ?
- A. Statistical report charts
- B. Statistical process controls (SPC)
- C. Quality management information system
- D. Quality management inspection data interface QM-ID
Answer: B
NEW QUESTION # 42
Which of the following QM business processes can require a user's digital signature?(3 Correct Ans)
- A. Result recording in the inspection Lot
- B. Defective recording in the inspection Lot
- C. Approval of quality notification
- D. UD for an inspection lot
- E. Manual confirmation of a physical sample drawing
Answer: A,D,E
NEW QUESTION # 43
......
All C-TS414-2023 Dumps and Training Courses: https://www.testkingpdf.com/C-TS414-2023-testking-pdf-torrent.html
Help candidates to study and pass the SAP Certified Associate - SAP S/4HANA Cloud Private Edition, Quality Management Exams hassle-free: https://drive.google.com/open?id=1aY2cWp422lcnP0vjuITRd9acAwU-Xcpb
